La Crosse Technology WS8157U instruction manual Batteries Change, Do not SET the Clock

Page 5

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER(INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIO-CONTROLLED CLOCK)

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the steps below:

1.Remove the battery cover by pushing down towards bottom of transmitter and sliding cover out.

2.Insert the batteries, observing the correct polarity (see marking inside battery compartment).

3.Replace the battery cover on the unit.

ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING RECHARGEABLE BATTERIES.

TO INSTALL AND REPLACE BATTERIES IN THE RADIO-CONTROLLED CLOCK

The radio-controlled clock uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the steps below:

1.Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover.

2.Insert batteries observing the correct polarity (see marking inside battery compartment).

3.Replace compartment cover.

DO NOT SET THE CLOCK.

BATTERIES CHANGE:

For best performance, batteries should be replaced at least once a year to maintain the best running accuracy. Ensure that the batteries used are new and the correct size.

Please help in the preservation of the environment and return used batteries to an authorized depot.

4

Image 5
Contents RADIO-CONTROLLED Clock with Outdoor Wireless Temperature Table of Contents Nist Glossary of Common TermsRADIO-CONTROLLED Clock FeaturesOutdoor Temperature Transmitter Do not SET the Clock Batteries ChangeDo not Press ANY Buttons for 15 Minutes SETTING-UPFunction Keys Weather Icons LCD Screen DescriptionsWeather Forecast Weather Tendency Arrows Manual SettingsDST Setting daylight saving time LCD Contrast SettingTime Zone Setting Language Setting Time Reception Setting ON/OFF12/24 Hours Time Display Setting Or F Temperature SettingDate Setting Year SettingMonth Setting Alarm Setting Exit the Manual Setting ModesChanging the Display Mode DAY, SECONDS, and Temperatures Snooze Setting To Deactivate the AlarmOutdoor Temperature Transmitter 433MHz Reception Check for Outdoor Temperature TransmitterPositioning Wall Mounting Positioning the RADIO-CONTROLLED ClockFoldout Table Stand Mounting with Adhesive Tape Positioning the Outdoor Temperature TransmitterMounting with Screws Troubleshooting Specifications Care and MaintenanceWarranty Information Page FCC ID OMO-01RX Receiver OMO-01TX Transmitter FCC Disclaimer