La Crosse Technology WS-7075U instruction manual Snoozing and Stopping the Alarm

Page 15

press the AL1 button (removing the ((1)) icon from the screen). To reactivate the alarm, press the AL1 button again.

6.After each activation or deactivation, the programmed alarm time is displayed. Wait 15 seconds and the date will display in the DATE LCD again.

7.To set, activate, and deactivate alarm 2, follow the directions above for alarm 1—using the AL2 button instead of the AL1 button. The ((2)) icon will represent activation and deactivation of Alarm 2.

B. SNOOZING AND STOPPING THE ALARM

1.The snooze function is activated by pressing any one of the following buttons: SET, IN, OUT, or SNZ.

2.To turn the alarm off completely, press any of these buttons: CH, AL1, AL2, or DATE.

3.The snooze function will last for 5 minutes before the alarm begins to sound again. Either the ((1)) or the ((2)) icon will flash during the snooze mode.

VI. ADDING OUTDOOR REMOTE CONTROL SENDERS (OPTIONAL)

The WS-7075U is able to receive signals from 3 different Remote Control Senders. The Remote Control Sender model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set- up of Remote Control Sender units with the WS-7075U. These extra sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. A TX3U will monitor temperature only, and the TX3UP will monitor the temperature via a probe for use in pools, spas, etc.

Note: When setting up multiple units it is important to remove the batteries from all existing units in operation, then to insert batteries first into all the Remote Control Sender units, and in numeric sequence. Second install batteries into the Indoor Temperature Station. Transmission problems will

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents WS-7075U Wireless 433 MHz Radio-controlled Weather Station Detailed Set-Up Guide Table of ContentsInventory of Contents Quick SET-UP Guide Weather Station Function Keys Program ModeII or 24 Hour Time Setting III. Time Zone SettingDate LCD IV. Daylight Saving Time DST SettingWwvb Remote Control Time Manual Time SettingTime VI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD ContrastFeatures of the WS-7075U Weather ForecastWeather Icons Weather Tendency Arrows Viewing the Outdoor Temperature Records III. Outdoor TemperatureIV. Minimum and Maximum Temperature Records Viewing the Indoor Temperature RecordsResetting the Mimimum and Maximum Records Alarm FunctionSetting the Alarm alarms 1 VI. Adding Outdoor Remote Control Senders Optional Snoozing and Stopping the AlarmSET-UP of Multiple Units Mounting Remote Control Sender Mounting with ScrewsMounting with Adhesive Tape II. the Indoor Temperature Station Using the Table StandWall Mounting Troubleshooting Maintenance and Care Instructions Dimensions L x W x H SpecificationsTemperature measuring range Power SupplyWarranty Information Support@lacrossetechnology.com
Top Page Image Contents