La Crosse Technology WS-7075U instruction manual Wwvb Remote Control Time, Manual Time Setting

Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time, and should select “DST 0.”

5.Press the SET button to confirm and advance to the Time setting mode.

V.TIME

There are two methods by which the time can be set:

A)Automatically via WWVB reception, or

B)Manually.

A. WWVB (Remote Control Time)

This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 6-10 minutes during optimal conditions. The best conditions for reception is at night, between midnight and 6:00 am—when there is less atmospheric interference. To keep your time as accurate as possible, the Weather Station conducts a WWVB search every night between these hours, and overrides any manually set time. The WWVB tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress, will remain steady when the signal has been received, and nothing will be displayed in all other situations. If the WWVB time has not been received after 10 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless).

B. MANUAL TIME SETTING

1.Press and hold the SET button for 3 seconds or until “12h” flashes in the DATE LCD.

2.Press the SET button 3 more times (until the hour digit flashes in the TIME LCD).

3.Press the CH button to change the hour. Press the CH button once and the hour will increase by one, twice and the hour will increase by two, etc.

8