La Crosse Technology WS-7075U Program Mode, Function Keys, II or 24 Hour Time Setting

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or either the IN or the OUT buttons are pressed during programming modes the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections III through VIII, you can advance to step 3 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I. FUNCTION KEYS

The Secondary Buttons are located directly below the Primary Buttons, and behind the La Crosse Technology shield on the face of the unit. To access the Secondary Buttons: place a solid object in the slot (above the shield) and gently pull out and down.

Primary Buttons

Secondary Buttons

II.12 OR 24 HOUR TIME SETTING

1.Press and hold the SET button for 3 seconds, or until “12 h” flashes in the DATE LCD.

2.Press the CH button to toggle between 12 and 24-hour time.

3.Press the SET button to confirm the 12/24-hour setting, and to advance to Time Zone Setting.

III. TIME ZONE SETTING

The default time zone is EST, “-5hr” (Eastern Standard Time), to change this setting:

1.Press and hold the SET button for 3 seconds, or until “12 h” OR “24 h” flashes in the DATE LCD.

6