PSC PowerScanTM RF manual Using the PowerScan RF System, Battery Charging and Maintenance

Page 10

Using the PowerScan RF System

This section covers the following topics:

•Battery Charging and Maintenance

•How to Scan

•LED and Beeper Indications

Battery Charging and Maintenance

		When the scanner is in use, a low battery condition
		is indicated by a repeated two-flash signal from the
		scanner’s green LED every time the trigger is pulled
		before the laser is enabled. This indicator may have
	NOTE	been disabled via custom programming. See LED
	NOTE	and Beeper Indications for more information.
		and Beeper Indications for more information.

Seat the scanner in the Base Station as shown in Figure 4, ensuring that the battery fully engages the station’s metal contacts. The CHARGE LED on the Base Station should flash, indicating the bat- tery is charging.

Figure 4. Charging the Battery

User’s Guide

Image 10

Contents User’s Guide PSC Scanning, Inc DisclaimerTable of Contents References Unpack and Inspect Your ScannerQuick Start Instructions Installing the Battery Charging and Maintenance onNected to at the time of power-up Connecting the Base Station to the Host TerminalVerifying Scanner Operation Connecting Power to the Base Station Ment or interruption of system functionsLinking Newer configuration to the Base Station prior toLinking the Scanner to a Base Station May not be desirable to download a potentiallyVerifying Scanner-to-Base Station Communications Using the PowerScan RF System Battery Charging and MaintenanceDisposing of Batteries Tips for Extending Battery LifeNot illuminate Four Station Charger No LEDs illuminate, the battery may be tooOther batteries already present in the unit How to Scan Scanning TipsDepth of Field Specifications are subject to change without noticeDefinition of a mil Information about the Half Angle feature Depth of Field HDPaper Labels LR decoded model, Code More information about the Half Angle featureAre based on LR models set with the a 14 scan Reflective Labels LR decoded model, CodePaper Labels XLR decoded model, Code Reflective Labels XLR decoded model, CodeLED and Beeper Indications Grammable Scanner Green LED FunctionsScanner Yellow LED Functions Scanner Beeper FunctionsSpeaker Duration Comment Base Station LED FunctionsWhen a scanner is Active Symbologies Enhanced Scanning for Hard-to-Read Bar CodesYour nearest sales or service representative Scanner Labeling and NomenclatureIs a factory only repair item Laser CautionsLine and is not considered a malfunction Beam or attempt to repair the unit. DiscontinueRadio Frequency Interference Maintenance Cleaning the Scan WindowTroubleshooting Battery is charged. See Battery Charging and Maintenance onSample Bar Codes UPC-A User’s Guide Declaration of Conformity France Latin America Asia Pacific ItalyAustralia Japan Germany United Kingdom