PSC PowerScanTM RF manual Four Station Charger, Other batteries already present in the unit

Page 12

Four Station Charger

If you have a Four Station Charger, batteries are inserted for charging as shown in Figure 5. A 90% rapid charge can be achieved in only two hours when using this optional accessory, half the time than when a Base Station is used for charging. The LEDs at each battery station operate the same as the CHARGE LED on the Base Station, with rapid flashing indicating that rapid charging is taking place and on steady during trickle charging or when the rapid charge cycle is fin- ished.

 

If you insert a battery into the Four Station Charger

 

and no LEDs illuminate, the battery may be too

 

cold. Batteries must be at 0°C or higher to charge.

 

Do not attempt to charge cold batteries, since plac-

NOTE

ing them in the charger will curtail the charging of

other batteries already present in the unit.

 

Figure 5. Using the Four Station Charger Accessory

1

2

1. Device Power LED

2. Station Charge LEDs

User’s Guide

9

Image 12
Contents User’s Guide PSC Scanning, Inc DisclaimerTable of Contents Unpack and Inspect Your Scanner ReferencesQuick Start Instructions Installing the Battery Charging and Maintenance onConnecting the Base Station to the Host Terminal Nected to at the time of power-upVerifying Scanner Operation Connecting Power to the Base Station Ment or interruption of system functionsNewer configuration to the Base Station prior to Linking the Scanner to a Base StationLinking May not be desirable to download a potentiallyVerifying Scanner-to-Base Station Communications Using the PowerScan RF System Battery Charging and MaintenanceTips for Extending Battery Life Disposing of BatteriesNot illuminate No LEDs illuminate, the battery may be too Four Station ChargerOther batteries already present in the unit How to Scan Scanning TipsSpecifications are subject to change without notice Depth of FieldDefinition of a mil Information about the Half Angle feature Depth of Field HDMore information about the Half Angle feature Are based on LR models set with the a 14 scanPaper Labels LR decoded model, Code Reflective Labels LR decoded model, CodePaper Labels XLR decoded model, Code Reflective Labels XLR decoded model, CodeLED and Beeper Indications Grammable Scanner Green LED FunctionsScanner Yellow LED Functions Scanner Beeper FunctionsSpeaker Duration Comment Base Station LED FunctionsWhen a scanner is Active Symbologies Enhanced Scanning for Hard-to-Read Bar CodesYour nearest sales or service representative Scanner Labeling and NomenclatureLaser Cautions Line and is not considered a malfunctionIs a factory only repair item Beam or attempt to repair the unit. DiscontinueRadio Frequency Interference Maintenance Cleaning the Scan WindowTroubleshooting Battery is charged. See Battery Charging and Maintenance onSample Bar Codes UPC-A User’s Guide Declaration of Conformity Asia Pacific Italy Australia JapanFrance Latin America Germany United Kingdom