PSC PowerScanTM RF manual LED and Beeper Indications, Grammable Scanner Green LED Functions

Page 18

LED and Beeper Indications

The Base Station LED indicators and the scanner’s LEDs and beeper are used to announce system status and perform other useful signals. The tables below list the default function of each of the various indi- cators.

 

Some LED and beeper indications can be disabled

 

or modified via scanner programming. The tables

 

indicate the default behavior of the indicators, with

NOTE

shaded rows representing features that are pro-

grammable.

 

 

Table 1. Scanner GREEN LED Functions

LED

DURATION

COMMENT

INDICATION

 

 

Disable

100ms on, 900 ms off

Indicates the scanner

Indication

 

has been disabled.

Good Read

500 ms on

Indicates a bar code

has been read and

Indication

 

 

decoded.

 

 

Program

500 ms on, 500 ms off

Indicates the scanner

Mode

Continuous flashing

is in Programming

Indication

 

Mode.

Field

Varies. Consists of a

Enables service tech-

long flash followed by

Replaceable

nicians to identify

multiple short flashes.

Unit (FRU)

Field Replaceable Unit

 

Indications

 

(FRU) errors.

 

Two flashes at 100 ms

Occurs at trigger pull

Low Battery

before the laser is

on, 350 ms off.

enabled. Indicates the

Indication

 

 

battery is in need of

 

 

 

 

recharging.

User’s Guide

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User’s Guide PSC Scanning, Inc DisclaimerTable of Contents Unpack and Inspect Your Scanner ReferencesQuick Start Instructions Installing the Battery Charging and Maintenance onConnecting the Base Station to the Host Terminal Nected to at the time of power-upVerifying Scanner Operation Connecting Power to the Base Station Ment or interruption of system functionsLinking Newer configuration to the Base Station prior toLinking the Scanner to a Base Station May not be desirable to download a potentiallyVerifying Scanner-to-Base Station Communications Using the PowerScan RF System Battery Charging and MaintenanceTips for Extending Battery Life Disposing of BatteriesNot illuminate No LEDs illuminate, the battery may be too Four Station ChargerOther batteries already present in the unit How to Scan Scanning TipsSpecifications are subject to change without notice Depth of FieldDefinition of a mil Information about the Half Angle feature Depth of Field HDPaper Labels LR decoded model, Code More information about the Half Angle featureAre based on LR models set with the a 14 scan Reflective Labels LR decoded model, CodePaper Labels XLR decoded model, Code Reflective Labels XLR decoded model, CodeLED and Beeper Indications Grammable Scanner Green LED FunctionsScanner Yellow LED Functions Scanner Beeper FunctionsSpeaker Duration Comment Base Station LED FunctionsWhen a scanner is Active Symbologies Enhanced Scanning for Hard-to-Read Bar CodesYour nearest sales or service representative Scanner Labeling and NomenclatureIs a factory only repair item Laser CautionsLine and is not considered a malfunction Beam or attempt to repair the unit. DiscontinueRadio Frequency Interference Maintenance Cleaning the Scan WindowTroubleshooting Battery is charged. See Battery Charging and Maintenance onSample Bar Codes UPC-A User’s Guide Declaration of Conformity France Latin America Asia Pacific ItalyAustralia Japan Germany United Kingdom
Top Page Image Contents