PSC PowerScanTM RF Connecting Power to the Base Station, Ment or interruption of system functions

Page 7

2.Consult your Host Terminal manual to determine the required communication parameters for the Host Terminal (e.g., baud rate, parity, etc.) and, if necessary, modify the pro- grammed parameters to be compatible with those require- ments. Scanner and Base Station programming is performed using one of the following:

-Configurator Express™ Programming Software

-PowerScan™ Bar Code Scanner Programming Guide

See References for more information about how to obtain software and manuals for this product.

NOTE

 

The Host Terminal manual should also be consulted

 

as to whether power must be turned off before con-

 

necting peripheral devices. Ensure that the correct

CAUTION

procedure is followed to avoid damage to equip-

ment or interruption of system functions.

3.Connect the I/F cable to the proper port on the Host Terminal (check your Host Terminal manual to determine hardware requirements).

4.Connect the AC Adapter's power cord at the Base Station and plug the AC/DC adapter in at the wall outlet (see Figure 3). The Base Station’s POWER LED should be illuminated when the unit is properly connected to power.

Figure 3. Connecting Power to the Base Station

4

PowerScan™ RF Scanner

Image 7
Contents User’s Guide Disclaimer PSC Scanning, IncTable of Contents References Unpack and Inspect Your ScannerQuick Start Instructions Charging and Maintenance on Installing the BatteryNected to at the time of power-up Connecting the Base Station to the Host TerminalVerifying Scanner Operation Ment or interruption of system functions Connecting Power to the Base StationMay not be desirable to download a potentially Newer configuration to the Base Station prior toLinking the Scanner to a Base Station LinkingVerifying Scanner-to-Base Station Communications Battery Charging and Maintenance Using the PowerScan RF SystemDisposing of Batteries Tips for Extending Battery LifeNot illuminate Four Station Charger No LEDs illuminate, the battery may be tooOther batteries already present in the unit Scanning Tips How to ScanDepth of Field Specifications are subject to change without noticeDefinition of a mil Depth of Field HD Information about the Half Angle featureReflective Labels LR decoded model, Code More information about the Half Angle featureAre based on LR models set with the a 14 scan Paper Labels LR decoded model, CodeReflective Labels XLR decoded model, Code Paper Labels XLR decoded model, CodeGrammable Scanner Green LED Functions LED and Beeper IndicationsScanner Beeper Functions Scanner Yellow LED FunctionsBase Station LED Functions Speaker Duration CommentWhen a scanner is Enhanced Scanning for Hard-to-Read Bar Codes Active SymbologiesScanner Labeling and Nomenclature Your nearest sales or service representativeBeam or attempt to repair the unit. Discontinue Laser CautionsLine and is not considered a malfunction Is a factory only repair itemRadio Frequency Interference Cleaning the Scan Window MaintenanceBattery is charged. See Battery Charging and Maintenance on TroubleshootingSample Bar Codes UPC-A User’s Guide Declaration of Conformity Germany United Kingdom Asia Pacific ItalyAustralia Japan France Latin America