Printronix SL5000e manual PPI1 EPC Programming Examples

PPI1 EPC Programming Examples

PPI1 EPC Programming Examples

IMPORTANT For all examples make sure Label Length in the QUICK SETUP menu matches the physical length of the installed media.

Example 1

This programming example programs data into an

RFID tag and prints the encodation onto a smart label.

^XA

//Begin ZPL form.

^WT0^FH^FD_87_D0_03_45_67_AB_CD_EF^FS //Write Tag with data = “87D0034567ABCDEF” //(hex format).

^RT1,0,1,1^FS

//Read Tag into data element 1, 8–byte (16 characters) //long (hex format).

^FO100,100^A0N,60^FN1^FS //Print data in element 1.

^XZ

//End and print label.

Example 2

Same as Example 1, except an alternative PPI1 syntax that does not require underscores between the hex characters is used.

^XA

//Begin ZPL form.

^WT0,,,,1FDN^FD87D0034567ABCDEF^FS

//Write Tag with data = “87D0034567ABCDEF” //(hex format).

^RT1,0,1,1^FS

//Read Tag into data element 1, 8–byte (16 characters) //long (hex format).

^FO100,100^A0N,60^FN1^FS //Print data in element 1.

^XZ

//End and print label.

43