Operation |
Loading Paper
Loading An Internal Roll
Unlock the door of the printer by 1 Unlock Door pressing on the open circles printed on
the two latches at the lower corners of the door. Pull up on the latches to open
the door.
2 Remove Paper Holder
Remove the paper carrier from the
printer and remove the paper rod
from the carrier. Slip the empty
Slip the paper rod through the core of the new paper roll and install the paper roll on the carrier so the paper feeds from the top of the roll toward the front of the carrier. Feed a few inches of paper from the roll so it will extend over the platen after insertion.
core off the paper rod.
3 Insert Roll In Printer
Insert the paper carrier in the printer and close the door with the latches unlocked.
4 Lock Door
Press on the solid circles printed on the door latches to lock them. Tear off the extra paper.
DT Chassis Printers/Plotters