Printek 810, 820G, 840DL/G, 820DL/G Technical Specifications, General Specifications Performance

Technical Specifications 7-1

General

Specifications

Performance

Forms Compatibility

Environmental

Regulatory

Power Requirements (840DL/G)		100-240 VAC, 500 VA, 50~60Hz
Power Requirements (820DL/G and 820G)		100-240 VAC, 240 VA, 50~60Hz
Power Requirements (810)		100-240 VAC, 150 VA, 50~60Hz
Height		4.5 inch (114 mm)
Width		12.2 inch (310 mm)
Depth		12.4 inch (315 mm)
Unit Weight		14 lbs (6.4 kg)
Shipping Weight		18 lbs (8.2 kg)
Interface		High Speed Parallel
Print Speed (840DL/G)		0.5 to 4 inch/sec
Print Speed (820DL/G and 820G)		0.5 to 2 inch/sec
Print Speed (810)		0.5 to 1 inch/sec
Horizontal Resolution		203 dpi (8 dots/mm)
Vertical Resolution		203 dpi (8 dots/mm)
Overall Forms Width		8.75 inch (222 mm)
Internal Roll Capacity		2.6 inch (66 mm) diameter roll
For 840DL/G and 820DL/G:
Bottom Feed Roll Capacity		5 inch (152 mm) diameter roll
Bottom Feed Fan-fold Capacity		18 inch (457 mm) stack height
Forms Mark	See Section 3-3 for forms mark specifications
Storage Temperature		-40oC (-40oF) to 60oC (140oF)
Operating Temperature (non-condensing)		5oC (41oF) to 40oC (104oF)
Shock & Vibration (non-operational)		3G, 0 to 50 Hz, 3 axes
Environmental Ingress (IEC 529)		IP54
CE		ITE Directive, Edition 2
FCC		Class A

Information in this document is subject to change without notice and does not represent a commitment on the part of

Printrex, Inc. No part of this manual may be reproduced or transmitted in any form or by any means, for any purpose other

than the purchaser’s personal use, without the expressed written permission of Printrex, Inc.

All rights reserved. Printed in the United States of America.

© Copyright 2003 by Printrex, Inc.

Part Number: 1028-0071 Rev 1

Printrex • 276 East Gish Road • San Jose, CA 95112-4703 • Ph: (408) 573-1200 • Fax: (408) 573-1600 • www.printrex.com