Printek Mt3-II Wi-Fi Communication, Required Switch Settings Default Network & Wireless Settings

Configuration and Data Connectivity

Wi-Fi Communication

Mt3-II printers equipped with the optional Wi-Fi Interface can communicate with either a host or a network that is compatible with the 802.11b wireless communication standard.

The following tables show the required settings for the configuration switches and the default network and wireless settings when the printer is shipped from the factory.

Required Switch Settings		Default Network & Wireless Settings
SW1	OFF	IP Address:	192.168.150.150
SW2	ON	Subnet Mask:	255.255.255.0
SW3	ON	Gateway Address:	0.0.0.0
SW4	OFF	DHCP:	Disabled
SW5	OFF	Wi-Fi Type:	Ad-Hoc
SW6	OFF	Add-Hoc Channel:	3
SW7	OFF	WEP Level:	0 (Disabled)
		SSID:	Printek
		Print Port:	8023

To make changes to the network and/or wireless configuration, a Wi-Fi Setup utility is available. This utility may be loaded onto a Windows desktop system and communicates with the printer via the RS-232 Serial port. This utility is available on the Mt Series Developer’s CD or may be downloaded from www.printek.com. A screen shot of this utility is shown below. Please follow the instructions provided with the utility.

Note: This utility requires the use of an optional serial cable – Printek part number 91251.

Wi-Fi Set Up Utility

14