Printek Mt3-II manual Printer Specifications, Media Specifications

Page 29

Printer Specifications

Height: 2.25 inches (57mm)

Width: 4.25 inches (108mm) Length: 6 inches (152mm)

Weight: w/battery & supply 1.3 lbs. (0.61 kg) Shipping weight: 3 lbs. (1.4 kg)

Power: 7.4 V Li-Ion (2200mAH) battery

Operating Temp. Limits: 41 - 104°F (5 - 40°C) Storage Temp. Limits: -4 - 140°F (-20 - 60°C)

Operating Humidity Limits: 20% to 85% non-condensing Storage Humidity Limits: 5% to 95% non-condensing

Print head: 3 inches wide (80mm) 203 dpi (8 dots per mm)

Printing Method: Thermal Direct

Print Speed: Up to 2.0 inches per second

Supported Bitmap Fonts: Standard (normal and bold) Large (normal)

Reduced (normal and bold) Large rotated.

Supported Bar Codes: Codabar, Code 39, UCC/EAN – 128, UPC/EAN/JAN, Interleaved 2 of 5,Code 128

Memory: 32K SRAM, 32K Program Flash, 224K Fonts and Logos Flash Charging Time: Approximately 180 minutes

Communications: RS-232 and IrDA (Standard) Bluetooth or Wi-Fi (Optional)

Print Ratio: 25% black maximum/sq. in.

Media Specifications

Media type: Thermal direct receipt paper Thickness: 2.2 to 3.5 mils (receipt paper)

Width: 3.125 inches (80mm)

Length: 1 roll of receipt paper is approximately 44 feet (13.4 M) Sensing compatible: Black mark (on face of supply)

Paper roll diameter: Outside: 1.375 inches (32 mm) Inside: .25 inches (6mm)

Maximum Print Area: 2.85 inches (72 mm) Wide by 8.0 inches (203mm) Long

Approved Vendors: Kansaki:P300, P310, P350, P354, P390, P530UV, TO281CA, OP200, TO381N, F180, F380, F550

Jujo: TF-50KS-E2C

Honshu: FH65BV-3

23

Image 29
Contents Mt3-II Series Operator’s Manual Wi-Fi Equipped Models Bluetooth Equipped ModelsBattery Disposal Acknowledgments FCC Part 15 Class BPage Page Table of Contents Page Models and Options Manual ContentsIntroduction Page Getting Started Battery and Safety InformationGetting Started Installing the Battery CartridgeAttaching The Belt Loop System Charging the BatteryPage Tearing Off Print Job OperationMedia Loading Initial Power Up And Self-Test Indicator State Status Reading the Indicator StatusMCR Indicator Status Using the Magnetic Card Reader MCRConfiguration Switches Configuration and Data ConnectivitySerial RS232C Communication IrDA Communication Bluetooth Wireless Data CommunicationRequired Switch Settings Default Network & Wireless Settings Wi-Fi CommunicationPrinter Font Commands Printer Font Commands Courier Character SetProgramming Information Ascii Control CharactersMagnetic Card Reader Control Commands Printer Graphic CommandsGraphic Logo and Bar Code Commands Printer Supervisory and Control CommandsResident Character Sets Page Charging The Printer Battery Printer Maintenance and TroubleshootingCleaning Important Notes On Charging The Battery Verifying Battery Charge StateObtaining Service TroubleshootingPrintek Mt3-II Troubleshooting Guide Problem Possible Cause SolutionPage Media Specifications Printer SpecificationsWarranty Printer Supplies & AccessoriesObtaining Warranty Service Part Number DescriptionAscii Glossary of TermsGlossary of Terms