Printek Mt3-II manual Printer Graphic Commands, Magnetic Card Reader Control Commands

Configuration and Data Connectivity

Printer Graphic Commands

Printer Command String	Printer Action
ESC a n	Select dot line spacing between printed lines.
ESC J n	Graphic Line Feed command
ESC P #	Select Online mode, characters printed as received
ESC P $	Select Buffer mode, characters are printed on (^D)
ESC V n1 n2 data	8-bit Graphic command
ESC v n1 n2 data	8-bit Compressed Graphic Command

Magnetic Card Reader Control Commands

Printer Command String	Printer Action
ESC M nnm CR	Select MCR with nn auto timeout..
ESC C	Cancel MCR read process.

Graphic Logo and Bar Code Commands

Command String	Printer Action
ESC L G n	Prepare printer to load image
ESC G 0x0FF	Loading Logo Complete
ESC L g n	Print stored logo image
ESC z n1 n2 L data	Print Bar Code without visible text
ESC Z n1 n2 L data	Print Bar Code with visible text
ESC Q J n	Reverse Dot Feed
ESC Q Q n	Set Out of Paper Sensitivity
ESC Q F m	Set Forward Black Mark Seek
ESC Q B m	Reverse Black Mark Seek

Printer Supervisory and Control Commands

Command String	Printer Action
^V	Buffer, power timer & battery status
^B	Buffer status
ESC P ^	Print Battery Voltage
ESC P alpha	Time and date print and control
ESC M 000 CR	Disable the power down timer
ESC M nn0 CR	Sets the power down timer to nn seconds
ESC M C	Reset Auto power down to 20 seconds
ESC P (	Firmware version query
ESC P )	Hardware model query

16