2.1.3 Remote Management
The remote management function allows you to designate a host in the Internet the ability to configure the Broadband router from a remote site. Enter the designated host IP Address in the Host IP Address field.
Parameters | Description |
|
|
Host Address | This is the IP address of the host in the Internet that will have |
| management/configuration access to the Broadband router from a |
| remote site. This means if you are at home and your home IP address |
| has been designated the Remote Management host IP address for this |
| router (located in your company office), then you are able to configure |
| this router from your home. If the Host Address is left 0.0.0.0 this means |
| anyone can access the router’s |
| location, providing they know the password. |
| Click the Enabled box to enable the Remote Management function. |
| Note: When you want to access the |
| remote site, you must enter the router’s WAN IP address (e.g. 10.0.0.1) |
| into your |
| (see below). You’ll also need to know the password set in the Password |
| Setting screen in order to access the router’s |
Port | The port number of remote management web interface. |
33