Topcom WBR 7101GMR manual Local IP Address, Local Port Range, Remote IP Address, Remote Port Range

Local IP Address	Enter the local IP address range of the packets
	that this rule will apply to. If you assign
	192.168.1.3 – 192.168.1.5, it means 3 IP
	addresses: 192.168.1.3, 192.168.1.4 and
	192.168.1.5
Local Port Range	Enter the local port range of the packets that this
	rule will apply to. You can assign a single port
	number here or assign a range of port numbers
	by assigning the first port number and the last
	port number of the range. The two numbers are
	separated by a dash “-“, for example “101-150”
	means from port number 100 to port number
	150 – the range of 50 port numbers.
Remote IP Address	Enter the remote IP address range of the
	packets that this rule will apply to. If you assign
	192.168.1.3 – 192.168.1.5, it means 3 IP
	addresses: 192.168.1.3, 192.168.1.4 and
	192.168.1.5
Remote Port Range	Enter the remote port range of the packets that
	this rule will apply to. You can assign a single
	port number here or assign a range of port
	numbers by assigning the first port number and
	the last port number of the range. The two
	numbers are separated by a dash “-“, for
	example “101-150” means from port number 100
	to port number 150 – the range of 50 port
	numbers.
Traffic Type	Select the traffic type of the packets that this rule
	will apply to. We list some popular applications
	here to ease the configuration. You also can get
	the same result by using other parameters, for
	example source or destination port number, if
	you are familiar with the application protocol.
Protocol	Select the protocol type of the packets that this
	rule will apply to.
Apply	Apply and exit the form.
Reset	Clear the content of this form.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

59