Topcom 4001G manual Site Survey

Page 11

3.1Site Survey

When you open the Topcom Configuration Utility, the system will scan all the channels to find all the access points/stations within the accessible range of your adaptor and automatically connect to the wireless device with the highest signal strength. From the “Site Survey”, all the networks nearby will be listed. You can change the connection to another networks or add one of the networks to your own profile list.

Parameter

Description

Available Networks

This list shows all available wireless networks within range of your

 

adaptor. It also displays the information of the networks including

 

the SSID, BSSID, Signal Strength, Channel, Encryption,

 

Authentication and Network Type. If you want to connect to any

 

networks on the list, double-click the item on the list, and the

 

adaptor will automatically connect to the selected network.

Rescan Button

Click “Rescan” button to collect the new information of all the

 

wireless networks nearby.

Connect Button

Click “Connect” to connect to the selected network.

Add to Profile Button

Add the selected network to Profiles list.

 

 

8

Image 11
Contents Full User Guide Page Contents Introduction Specifications FeaturesPackage Contents Installation Procedure Page Page Configuration Utility Site Survey Profile Configuration Page Authentication and Security Page Page Radius 1.3 802.1x Setting-Certification 1.4 802.1x Setting-CA Server Link Status Page Advance StatisticsPage Page About Turbo ModePage Troubleshooting What is BSS ID? What is Spread Spectrum?