Topcom 4001G manual Authentication and Security

Page 15

Parameter

Description

RTS Threshold

Minimum packet size required for an RTS (Request To Send). For

 

packets smaller than this threshold, an RTS is not sent and the

 

packet is transmitted directly to the wireless network. Select a

 

setting within a range of 0 to 2347 bytes. Minor change is

 

recommended.

Fragment Threshold

The value defines the maximum size of packets; any packet size

 

larger than the value will be fragmented. If you have decreased

 

this value and experience high packet error rates, you can

 

increase it again, but it will likely decrease overall network

 

performance. Select a setting within a range of 256 to 2346 bytes.

 

Minor change is recommended.

Channel

This setting is only available for Ad Hoc mode. Select the number

 

of the radio channel used for the networking. The channel setting

 

should be the same with the network you are connecting to.

3.2.1.2Authentication and Security

Parameter

Description

Authentication Type

This setting has to be consistent with the wireless networks that

 

the adaptor intends to connect.

 

Open – No authentication is needed among the wireless network.

 

Shared – Only wireless devices using a shared key (WEP Key

 

identified) are allowed to connecting each other.

 

12

Image 15
Contents Full User Guide Page Contents Introduction Specifications FeaturesPackage Contents Installation Procedure Page Page Configuration Utility Site Survey Profile Configuration Page Authentication and Security Page Page Radius 1.3 802.1x Setting-Certification 1.4 802.1x Setting-CA Server Link Status Page Advance StatisticsPage Page About Turbo ModePage Troubleshooting What is BSS ID? What is Spread Spectrum?