Texas Memory Systems RamSan-300/320 Text Management Interface, Front Panel menu system layout

Page 18

↓The “↓” button scrolls down through the menu. The “↓” button is also used confirm certain commands, as indicated on the display. If the menu is not selected, this button is disabled.

3.1.1Front Panel menu system layout

The following details the menu system of the front panel display:

Main Menu Ethernet Setup

Show Current Config Set IP Config

Static

IP

Subnet Mask Gateway

DHCP None

No Change (Exit) Restart Network Exit Menu

Active Monitor Mode/Deactivate Monitor Manual Shutdown

Power off system? LED Display

Set LED Mode

Display Bandwidth Display IOPS Performance Demo LED Test Pattern Disable LEDs

Exit Menu Set LED Brightness

LED Brightness [Level] Exit Menu

Display logo Exit Menu

3.2Text Management Interface

The RamSan’s management port allows you to manage, configure, and monitor system behavior.

You may connect to the management port with either a DB-9 serial cable or an RJ-45 Ethernet cable.

3.2.1Connecting using a terminal program

To connect to the RamSan using a serial port connection, use a dumb terminal or a terminal emulation program such as Windows™ HyperTerminal. Set your baud rate to 9600 with 8 data bits, 1 stop bit, no parity, and no flow control.

RamSan-300/320 User’s Manual

- 14 -

Image 18

Contents RamSan-300/320 User’s Manual RamSan-300/320 User’s Manual Table of Contents Batteries Fans Document Overview Safety PrecautionsPreface ConventionsRevision History Following table describes revisions to this documentIntroduction OverviewPower System ComponentsNon-Volatility Configurable Backup Active BackupTM mode optionalPerformance Electro-Static Discharge Warning InstallationBattery Warning System InspectionRamSan-320 Rack Mounting Connecting the Fibre Channel PortsConnecting the Power Supplies FC 4 FCPower AC Voltage Power switchAC Voltage indicator light Turning on the SystemSystem Initialization System is now ready for normal operation Management Tool Overview Front Panel DisplayConnecting using a terminal program Text Management InterfaceFront Panel menu system layout Connecting using Telnet General interface layout and instructionsText Management Interface Sub-Menu Web Management Interface Scrolling Sub-MenusWeb Management Interface Security Administration FunctionsSet password Logging into the systemVia Web Interface Click on the Management Control Processor graphicEnable/disable Telnet Via Text ManagementEnable/Disable Telnet Via Web ManagementFrom the Telnet Main Menu, select Management setup Telnet SetupEnable/disable Web Interface Enable/disable SnmpConfiguring Ethernet settings Configuring Ethernet settings via Front PanelDhcp Subnet Mask Configuring Ethernet settings via Text Management Interface Select IP assignment modeVia Front Panel Display Power Down SettingsManual shutdown Select Select hostnameFrom the Telnet Main Menu, select Power down system Automatic shutdownViewing system health and status Restore/Synchronize ProgressMonitoring Functions Front panel monitoringError StatusActive Monitor Mode Fibre Channel PerformanceLED Performance Monitoring LED DisplayIdentifying a RamSan Identify Device buttonViewing system uptime System Uptime StatusFrom the Telnet Main Menu, select Health and Status Health and StatusViewing system health Disk Status via Web interfaceBatteries Not displayed for the RamSan-300 Management Control Processor Power supplies Fans Good Viewing detailed fibre channel controller status 10 Fibre Channel Controller Status via Web InterfaceVia Text Management Statistics Viewing IO/second summary Via Web Interface13 IO/sec Summary Viewing bandwidth summary 14 Bandwidth Performance Graph via Web Interface15 Bandwidth Performance via Text Management Interface Viewing the system event and support logs LogsViewing controller details Click the Management Control Processor graphicClearing logged ECC errors Clearing the system event logFibre Channel LUN ConfigurationGigabytes System Memory ControllerExample LUN configuration Reconfigured LUN MappingAdding LUNs Via Web InterfaceSelect Change number of LUNs to add From the Telnet Main Menu, select LUN Setup Select Add LUNsVia Text Management Select Change size of LUNs to addViewing LUN status / LUN map Via the Web InterfaceTo view the LUNs for the entire system Viewing LUNs Assigned to FC ports via Web Interface Linking LUNs to/from Fibre Channel Controllers LUN Map ScreenSelect Exit to the LUN configuration menu Via Text Management Linking Fibre Channel ControllersUnlinking Fibre Channel ports from LUN Select Unlink LUNs from selected controllerChanging LUN numbers Select Assign different LUN # to this LUNResizing LUNs Select Resize LUNManaging access lists Viewing Current Access ListsSelect Print detailed WWN mask list for LUN Adding Access Lists Deleting Access ListsSelect Delete WWN mask from LUN Setting Scsi device identifiers Select Set Scsi device identifierDeleting LUNs 14 Deleting LUNs via Web InterfaceSetting backup mode 15 Deleting LUNsSelect Set backup mode for this LUN Volatile mode optional Fibre Channel Controller Configuration Changing Fibre Channel topology and link speedSelect Change topology Select Change link speedSelect Save changes and exit Auto-Detect Error Configuring high availability From the Telnet Main Menu, select Controller setupPrimary Active Primary Active, Secondary is Secondary Passive, Primary isPrimary Passive, Secondary is Secondary Active, Primary is System Maintenance Hot Swapping Power SuppliesHot Swapping Disk Drives Batteries FansSystem Event Log TroubleshootingStill Having Problems… Support LogOperating Environment SpecificationsPhysical Characteristics Non-operating EnvironmentAppendix a RamSan-3xx Series Replacement Parts Figure A-1 MCP-65 Management Control ProcessorFigure B-3 Power Supply Module Figure A-6 120 Gigabyte Replacement Hard Drive Appendix B FCC/Safety Notices Telephone and Software Support Field ServiceReturn to Factory Repairs/ReturnsSilver Warranty Advanced Parts Replacement Gold Warranty On-site Repair Business HoursPlatinum Warranty On-site Repair 24/7 Outside of Warranty