14.3 : SECUR ET - VMB WALL MOUNTING BRACKET
FIG 1. | The VMB is wall mounting bracket for the attachment of a VMY, |
| available in both black and white finishes, allowing the user secure |
| the Tannoy VNET“ Full range loudspeaker in either portrait or |
| landscape orientations to a wall. |
| The Tannoy VNET“ loudspeaker is attached to the bracket using |
| the accessories supplied. |
| This |
| models to maximise the integrity of fixing obtained. There are also |
| two holes either side of the fixing beam to allow the speaker cable |
| the pass through the wall plate and along the fixing beam to the |
| terminal panel resulting in a more discrete installation. |
| The fixing beam on the VMB has a number of mounting points from |
| which the VMY, V12Y & V15Y can be attached at varying distances |
| from the mounting surface. |
Only the screws, fasteners, shakeproof and plain washers specified on figure 3. should be used to assemble the VMB bracket
.
FIG 2.
Number on Fig 3. | Description | Quantity | |
1 | VMB Wall Bracket | 1 | |
2 | M10 | Nyloc Nut | 1 |
3 | M10 | Plain Washer | 1 |
4 | 30mm Square Blank Plug | 1 | |
5 | Nylon Spacer | 1 | |
6 | M10 x 85mm Screw | 1 | |
28