Thermaltake EPS 12V, ATX 12V 2.2 manual Trouble Shooting, Cable Retail PackageOptional

14 Toughpower 750W

ATX 12V 2.2 & EPS 12V Version

5. Trouble Shooting

Condition 1:

No DC output. The fan or fans are motionlessCheck:

1-1 Is the AC inlet plug firmly plugged into the PSU inlet socket?

1-2 Is the wall socket, extension power cord, power strip

or surge protector in use, fully functional and wall power switch turned 'ON'?

1-3 Is the Main Board socket (24pin) plug fully and firmly inserted?

Condition 2:

The fan or fans began rotating and then stopped. The system hangs without proceeding any further.

Check:

2-1 Are the peripheral connectors firmly plugged into accessory devices, such as the main hard drive, CD ROM , etc?

2-2 If a plug has been inadvertently connected in an off-set or reversed position, unplug the AC power source, reconnect the offending connectors and then wait for 30 seconds before replug in the AC power source and try again.

Note:

If the power supply still cannot or is still unable to power up after following the above instruction, please send the unit back to your dealer or retailer for after sales service.

Toughpower 750W 15

ATX 12V 2.2 & EPS 12V Version

6. Cable Retail Package(Optional)

P/N:A2169 PSU Adaptor Cable

Specification

	(A)		(B)
Model	Adaptor Cable		Adaptor Cable
Dimension	193mm		198mm
(mm)
Connector	4pin - 8pin		20pin - 24pin
type
Cable
sleeving	Red		Black
color
Material	Plastic		Plastic
Weight	16 g		58 g
Voltage	12 V		3.3V,5V,+12v,-12V
(A)4pin-8pin		(B)20pin-24pin

-Tough Atomic Energy

Build for the Extreme-

-Tough Atomic Energy

Build for the Extreme-