Telenetics MIU9.6FPD manual Serial Formats and Flow Control, Analog Interface

4. MODEM SPECIFICATIONS
Modulation:	Pulse Position Modulation (PPM)
Synch/Async:	Asynchronous Only
Data Rate:	0 – 1200bps
Error Correction:	None
Data Compression:	None
Data Modulation Connectivity:
	Using 16ms Polling Test

99.999% or better at -37dBm

99.5% or better at -40dBm

95% or better at -43dBm

Serial Formats and Flow Control:

Asynchronous and RTS/CTS flow control

Analog Interface

Tx Output Level:

Rx Sensitivity:

Line Termination:

Line Impedance:

2 or 4 Wire Configuration:

-0 dBm or -10 dBm * -43dBm or -33dBm * -43dBm for constant carrier -40dBm for polling carrier Dip Switch Selectable * 600 ohms balanced

Dip Switch Selectable *

MIU9.6FPD Installation, Operation & Diagnostics April 25, 1998 Page 5