11. Technical Specifications
Frequency Response (1) +/- 3dB
Recommended Amplifier Power | (passive Full Range) |
Power Handling(2)
Passive Full Range
Biamp (LF)
Biamp (HF)
Sensitivity (1)
2.83volt @ 1m Passive Full range Biamp (LF) Biamp (HF)
Maximum SPL (3)
@1m Passive Full Range Biamp (LF)
Biamp (HF)
Impedance
DI Averaged (PCQ)
@1kHz (ISO)
@2kHz (ISO)
@4kHz (ISO)
@8kHz (ISO)
@16kHz (ISO)
Q Averaged (PCQ)
@1kHz (ISO)
@2kHz (ISO)
@4kHz (ISO)
@8kHz (ISO)
@16kHz (ISO)
Distortion
0.1Full Power 250 Hz
1000 Hz
10000 Hz
0.01Full Power 250 Hz
1000 Hz
10000 Hz
Driver Complement
Crossover Point
67Hz - 23kHz
55Hz - 25kHz (with Tx2/TDx2 controller)
57Hz (50Hz with Tx2/TDx2 controller)
350 - 700 watt / 8 ohm
Average(2) | Programme Peak (10ms) | |
350 watt | 700 watt | 1400 watt |
350 watt | 700 watt | 1400 watt |
60 watt | 120 watt | 240 watt |
99dB (anechoic) | 102dB (half space) | |
99dB (anechoic) | 102dB (half space) | |
106dB (anechoic) |
| |
Average |
| Peak |
124 dB |
| 130 dB |
124 dB |
| 130 dB |
124dB |
| 130dB |
Nominal |
| 8.0 ohm (passive fullrange & each driver biamp) |
10.35, 500 Hz - 16 kHz 6.35 10.82 9.2 13 15.8
14.6, 500 Hz - 16 kHz 4.93 12.08 8.32 19.95 38
2nd Harmonic | 3rd Harmonic |
0.32% | 0.89% |
1.58% | 3.54% |
5.62% | 0.19% |
2nd Harmonic | 3rd Harmonic |
0.11% | 0.71% |
0.79% | 2.53% |
1.94% | 0.161% |
1 x 12” (300mm) PowerDual
Constant Directivity Dual Concentric Type number 3190
Passive 1.5kHz
2nd order high pass, 2nd order low pass
Product can be reconfigured for active /
Enclosure | 37.5 litre vented, Birch plywood |
Finish | Textured black paint (optional in white) |
Protective Grille | Foam covered, powder coated perforated steel |
Connectors | 2 x Speakon NL4MP IN/OUT |
| Configuration for biamp operation via the termination panel. |
Fittings | Recessed rear mounted carrying handle, |
| Blanking plate allows installation of a 35mm |
| 8 x M10 bracket inserts allowing for landscape or portrait orientations, |
| 8 x M10 flying inserts. |
Dimensions | 486mm(H) x 370mm(W) x 375mm(D) |
| 19.13”(H) x 14.57”(W) x 15.15”(D) |
Weight | 22 Kg (48.4 lbs) |
NOTES: | (1) Average over stated bandwidth. Measured at 1m on axis. |
| (2) Long term power handling capacity as defined in EIA standard RS - 426A. |
| (3) Unweighted pink noise input, measured at 1m in an anechoic chamber |
All Tannoy V Series products can be used with the Tannoy TDX2 Digital Controller for optimum system performance and when being used with various sub bass systems. Please visit our website at www.tannoy.com for further details
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.