Telenetics MIU202T-S manual Analog Line Type, Analog Line Specifications

5. ANALOG LINE SPECIFICATIONS

The MIU202T contains analog circuitry for connection to the public conditioned or unconditioned, Bell type 3002, 2 or 4-wire, full duplex voice grade leased lines or metallic lines (eg; pilot wires). The MIU202T will also interface to Power Line Carrier or Microwave radio voice channel networks.

The MIU202T has an RJ-11terminated connector. The following lists the MIU202T analog interfaces

Analog Line Type:

Conditioned or unconditioned, Bell type 3002, 2 or 4-wire, full duplex voice grade or metallic lines or better.

Analog Line Specifications:
Bandwidth	300	Hz to 3400 Hz (±3dB)
Impedance	600	/ 900 ohms , balanced
Frequency Response	400 to 3000Hz (±2dB)
Receiver Input Level	-16dBm max.
Output Level	+7 dBm
Noise Signal Level	-48 dBmO

MIU202T-S Installation, Operation & Diagnostics Edition: March 16, 1999 Page 7