Trust Computer Products 802.11g manual Right-click on

Page 29

IEEE 802.11g PCI Card Wireless Network Adapter

Click on Network adapters.

Right-click on the

Conceptronic IEEE 802.11g PCI Card Wireless Network Adapter - CB31.

Select Properties to check that the drivers are installed properly.

Look under Device Status to check that the device is working properly.

Click OK.

29

Image 29
Contents 108Mbps Super G Wireless PCI Adapter Contents Package Contents Introduction 108Mbps SuperG Wireless PCI AdapterLeds Standards Based Technology Wireless BasicsInstallation Considerations Getting Started Home Internet Network with Multiple IP Addresses To complete this installation, please follow these steps Set the Static IP Address of the wireless cardsInstall your Internet Sharing Software Check the Wireless Configuration for each wireless cardInstall the 108Mbps SuperG Wireless PCI Adapter Installation Installing the 108Mbps SuperG Wireless PCI Adapter 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Installing The Configuration Utility Ieee 802.11g PCI Card Wireless Network Adapter Uninstalling the Configuration Utility Click on Device Manager Uninstalling the Driver108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Configuration Tab Using the Configuration Utility for WindowsData Encryption AuthenticationSignal Strength Authentication StateStatus Tab Network TypeAdvanced State shows the Radio Status on or OFF Disable Radio Enable IP setting and Proxy setting in profileRemember mini status position Auto hide mini statusTransmit Power Power save ModeStart ad hoc network Ad-Hoc ChannelClick Device Manager Click PropertiesRight-click on 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Diagnostic LED Media Access ControlStandards Buy TypePhysical Dimensions WeightTransmitter Output Power Humidity