Trust Computer Products 802.11g manual Home Internet Network with Multiple IP Addresses

Page 9

IEEE 802.11g PCI Card Wireless Network Adapter

(Requirements: A Residential Gateway/Router connected with an Ethernet (CAT5) cable to an 802.11a/b Access Point or an 802.11a/g Access Point or another computer with an 802.11b/g WLAN card installed).

This type of installation requires that you provide a dynamic IP address for each computer on your network. You will need a DHCP-capable Residential Gateway/Router for your network.

To complete the installation, please follow these steps:

1.Connect the Router/Gateway to a Broadband connection, (e.g., a Cable modem or a DSL modem.)

2.Connect the WLAN Access Point to the router.

3.Install the 108Mbps SuperG Wireless PCI Adapter into a laptop computer on your wireless network.

4.Check the Device Manager to confirm that the wireless card is installed correctly.

5.By default, the wireless card is set to obtain a Dynamic IP Address. If you are having difficulty connecting, check to make sure that the IP Address of the wireless card is within the IP address range of your network.

2.A Home Internet Network with Multiple IP Addresses

(Network administrators with Static IPs can also follow these instructions.)

If you have two or more computers (laptops or desktops) and want to share files, printers, and Internet access using multiple IP addresses that you have purchased from your Internet Service Provider -or-you want to connect to an Ethernet network that uses Static IP Addresses, then follow the instructions on the next page. When you have completed your network, it should look similar to this:

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 108Mbps Super G Wireless PCI Adapter Contents Package Contents Introduction 108Mbps SuperG Wireless PCI AdapterLeds Standards Based Technology Wireless BasicsInstallation Considerations Getting Started Home Internet Network with Multiple IP Addresses To complete this installation, please follow these steps Set the Static IP Address of the wireless cardsCheck the Wireless Configuration for each wireless card Install the 108Mbps SuperG Wireless PCI AdapterInstall your Internet Sharing Software Installation Installing the 108Mbps SuperG Wireless PCI Adapter 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Installing The Configuration Utility Ieee 802.11g PCI Card Wireless Network Adapter Uninstalling the Configuration Utility Click on Device Manager Uninstalling the Driver108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Configuration Tab Using the Configuration Utility for WindowsData Encryption AuthenticationSignal Strength Authentication StateStatus Tab Network TypeAdvanced State shows the Radio Status on or OFF Disable Radio Enable IP setting and Proxy setting in profileRemember mini status position Auto hide mini statusTransmit Power Power save ModeStart ad hoc network Ad-Hoc ChannelClick Device Manager Click PropertiesRight-click on 108Mbps SuperG Wireless PCI Adapter Ieee 802.11g PCI Card Wireless Network Adapter Diagnostic LED Media Access ControlStandards Buy TypePhysical Dimensions WeightTransmitter Output Power Humidity
Top Page Image Contents