SOYO SY-6ZB quick start Make Connections to the Motherboard, Hdd Led, Pwrbt Reset

SY-6ZBQuick Start Guide

Step 2. Make Connections to the Motherboard

This section tells how to connect internal peripherals and power supply to the Motherboard.

Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on how to connect internal and external peripherals to your new SY-6ZB Motherboard, please refer to SY-6ZB Motherboard User's Guide and Technical Reference online manual on CD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link ™(PC-PCI)						Wake-On-LAN Header: JP44
Connect the SB-Link ™ (PC-PCI) cable from your							Pin1		Pin2	Pin3
PCI audio card to this header.							5VSB		GND	MP-Wakeup
CPU Cooling Fan: CPUFAN						Chassis Fan: CHAFAN
Pin1		Pin2	Pin3		Pin1			Pin2		Pin3
GND		12V	SENSOR		GND			12V		SENSOR
Power LED Key Lock Speaker					Power LED				Keylock
+	_	+	_		Pin1	Pin2	Pin3		Pin1		Pin2
					5V	NC	GND Control Pin				GND
		+ _ + _					Speaker
					Pin1		Pin2		Pin3	Pin4
Reset	PWRBT Turbo LED HDD LED				5V		NC		NC	Speaker out
HDD LED			Turbo LED			PWRBT			RESET
Pin1		Pin2	Pin1		Pin2	Pin1		Pin2	Pin1		Pin2
LED Anode LED Cathode			LED Cathode		GND Power On/Off			GND	Power Good		GND
IrDA (Infrared Device Header): IR1						AT Power Cable
Pin1	Pin2	Pin3	Pin4	Pin5	Connect the AT Power cable to this
VCC	None	IRRX	GND	IRTX	connector. If you use AT power supply.
ATX Power On/Off: PWRBT					ATX Power Supply: ATX PW
Connect your power switch to this				Attach the ATX Power cable to this connector.
header (momentary switch type).				Note: Please make sure the ATX power supply is able to
To turn off the system,				provide at least 720mA of current on the +5VSB lead if
please press this switch and				you want to enable the advanced power management
hold down for longer than				functions, like Wake-On-LAN, Power-On by keyboard, etc.
4 seconds.

Hardware Installation

7