SOYO SY-6IWM quick start Introduction

Page 3

SY-6IWMQuick Start Guide

1 Introduction

Congratulations on your purchase of the SY-6IWMMotherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-6IWM Motherboard Uses’Guide that came with your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:

uThe SY-6IWM FW82810E AGP/PCI/AMR Motherboard

u This Quick Start Guide

u The Installation CD-ROM

u SOYO 3-in-1 Bonus Pack CD-ROM (Norton AntiVirus, Ghost and Virtual Drive)

uThe Foldable URM (Universal Retention Mechanism) Set (Factory installed on this motherboard)

u One IDE Device ATA 66 Flat Cable

u One Floppy Disk Drive Flat Cable

u Serial port flat cable with a 9-pin connector bracket

Introduction

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Quick Start Guide SY-6IWM Motherboard Introduction SY-6IWM Motherboard Layout Key Features Installation Install the Motherboard Memory Configuration Table + + CPU Default or Free Selection CPU frequency indication Set JP2, JP3,JP4 and JP7 to configure CPU FSB FrequencySet JP9 for hardware Write-Protect Enable/Disable Power-On by Keyboard JP1Clear Cmos Data Retain Cmos Data Cmos Clear JP5Select Standard Cmos Features Select Load Optimized DefaultsSelect Soyo Combo Feature Select Save & Exit Setup Insert the Soyo CD into the CD-ROM drive Soyo CDInstall Drivers and Unitilies Driver Short description of all available drivers followsEnter the Soyo CD Check the Latest ReleasesWavetable Memory Requirements Aureal Sound Driver InstallationUninstalling Windows 95/98 Drivers Quick Trouble shoot tips Bios Issues Can not get my board to run properly Soyo USA Soyo Korea SY-6IWM Serial
Top Page Image Contents