SOYO P4X400 AGP & P2P Bridge Control, Setting Description AGP Aperture, Size, AGP Mode

BIOS Setup Utility SY-P4X400 DRAGON Lite

3-4.1 AGP & P2P Bridge Control

Caution: Change these settings only if you are already familiar with the Chipset.

The [AGP & P2P Bridge Control] option changes the values of the chipset registers. These registers control the system options in the computer.

CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software

AGP & P2P Bridge Control

AGP Aperture Size			64M			Item Help
AGP Mode			4X
					Menu Level
AGP Driving Control			Auto
x AGP Driving Value			DA
AGP Fast Write			Disabled
AGP Master 1 WS Write			Disabled
AGP Master 1 WS Read			Disabled
DBI Output for AGP Trans			Disabled
:Move	Enter:Select	+/-/PU/PD:Value		F10:Save		ESC:Exit	F1:General Help
F5:Previous Values		F6:Fail-Safe Defaults				F7: Optimized Defaults

After you have completed the changes, press [Esc] and follow the instructions on your screen to save your settings or exit without saving.

AGP & P2P Bridge Control

	Setting	Description	Note
AGP Aperture
	256M
Size	128M	Select the size of Accelerated Graphics
	64M		Default
	32M	Port (AGP) aperture. The aperture is a
AGP Mode		portion of the PCI memory address range
	1X	This item allows you to your AGP mode,
	2X	if 8X AGP Card is used, this option will
		disappear.
	4X		Default

56