SOYO P4X400 specifications Soyo Combo Setup

BIOS Setup Utility SY-P4X400 DRAGON Lite

3-1 SOYO COMBO SETUP

This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS

[SOYO COMBO SETUP].

After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, select the [SOYO COMBO SETUP] option from the main menu and press the <Enter> key.

CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software

SOYO COMBO Feature

System Performance				Normal		Item Help
Frequency 1MHz Stepping				100 MHz		Menu Level
CPU Ratio Select				8X
DRAM Clock				By SPD
Auto Detect PCI/Dimm Clk				Disabled
Spread Spectrum				Disabled
CPU Vcore Select				Default
AGP(1.5) Voltage Select				Default
DDR(2.5) Voltage Select				Default
Advance Tune-Up Settings				Press Enter
Onboard 6Ch H/W Audio				Enabled
Onboard (10/100) Lan				Enabled
Quick Power On Self Test				Enabled
First Boot Device				Floppy
Second Boot Device				HDD-0
Third Boot Device				LS120
Boot Other Device				Enabled
Move	Enter:Select	+/-/PU/PD:Value			F10:Save	ESC:Exit	F1:General Help
F5:Previous Values			F6:Fail-Safe Defaults			F7: Optimized Defaults

The [SOYO COMBO SETUP] menu combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS.

40