SOYO P4X400 specifications Enter Password, SET User Password

BIOS Setup Utility SY-P4X400 DRAGON Lite

3.Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password:

Confirm Password:

4.Re-enter your password and then press [Enter] to exit to the Main Menu.

This diagram outlines the password selection procedure:

Type the Password			ROM PCI/ISA BIOS Press <Enter> without
and Press: <Enter>			entering the password
			CMOS SETUP UTILITY
		AWARD SOFTWARE,
STANDARD		Enter Password:
BIOS FEATURES
Enter Password: ∗∗∗∗∗			Password Disabled!!
Confirm Password: ∗∗∗∗∗			SAVE & EXIT SETUP
			EXIT WITHOUT SAVING
Esc	: Quit	After you confirm the password,
		press <Esc> to exit
F10	: Save & Exit
			Color

3-12 SET USER PASSWORD

When the user password option is on, you are not allowed to change any setting in the [CMOS SETUP UTILITY] except for changing the user's password.

The password setting procedure is similar to that for the [SUPERVISOR PASSWORD] (Refer to section 3-9).

78