SOYO SY-P4VDA Install Memory Module, Number of Memory Modules, RAM Type, Memory Module Size MB

Hardware Installation

SY-P4VDAQuick Start Guide

CPU Fan Installation

YourSocket478processorkitcomeswithacoolingfan.Mountthefanontheprocessoraccordingtothe instructionsprovidedbythemanufacturer.Thefanisakeycomponentthatwillensuresystemstability.The fanpreventsoverheating,thereforeprolongingthelifeofyourCPU.

Note:Remembertoconnectthefantotheappropriatepowersource.

Step 2. Install Memory Module

Your board comes with three DIMM sockets, Directly supports one DDR SDRAM channel, 64b wide, providing support max of 3 Double-Sided DIMMs with unbuffered (non-registered) and Non-ECC DDR

266.The largest memory capacity possible is 3GB. On this motherboard, DRAM speed can be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in the BIOS setup.

Memory Configuration Table

Number of Memory Modules	DIMM 1	DIMM 2	DIMM 3
RAM Type		DDR SDRAM
Memory Module Size (MB)
	64 /128 /256 /512 MB /1 GB

Step 3. Install Expansion Card

Themotherboardhas1AGPslotand5PCIslot.

1.Readtherelatedexpansioncard’sinstructiondocumentbeforeinsertingtheexpansioncardinto thecomputer.

2.Presstheexpansioncardfirmlyintoexpansionslotinmotherboard.

3.Besurethemetalcontactsonthecardareindeedseatedintheslot.

4.Replacethescrewtosecuretheslotbracketoftheexpansioncard.

5.Installrelateddriverfromtheoperatingsystem.

8