SOYO SY-K7VLM-B Connections to the Motherboard, USB34 USB3, CPU Cooling Fan, CD Line-in CDIN1

SY-K7VLM-BQuick Start Guide

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On- LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-K7VLM-B Motherboard, please refer to SY-K7VLM-B Motherboard User's Guide and Technical Reference online manual on the CD-ROM.

Connectors and Plug-ins

Standard IrDA (Infrared Device Header):					Wake-On-LAN Header: JP10
		SIRCON
Pin1	Pin2	Pin3	Pin4	Pin5	Pin1	Pin2			Pin3
VCC	NC	IRRX	GND	IRTX	5VSB	GND		MP-Wakeup
	USB3_4: USB3				USB3_4: USB4
Pin1	Pin2	Pin3	Pin4	Pin6	Pin7	Pin8	Pin9		Pin10
Power	Data(-)	Data(+)	GND	Power	Data(-)	Data(+)	GND		GND
CPU Cooling Fan:			CPU Cooling Fan:			Chassis Fan: CHAFAN1
CPUFAN			CPUFAN2
Pin1	Pin2	Pin3	Pin1	Pin2	Pin3	Pin1	Pin2		Pin3
GND	12V	SENSOR	GND	12V	NC	GND	12V		SENSOR
			CD Line-in: CDIN1
Connect the CD Line-in cord from the CD-ROM device to					Pin 1	Pin 2	Pin 3		Pin 4
the matching header CDIN1					L	G	G		R
HDD LED PWRBT Reset					Power LED
+				Pin1		Pin2			Pin3
				5V		NC			GND
	+	_	+		Speaker
				Pin1	Pin2	Pin3			Pin4
		Power LED
Speaker				5V	NC	NC			Speaker out
HDD LED			PWRBT			RESET
Pin1		Pin2	Pin1	Pin2		Pin1			Pin2
LED Anode	LED Cathode		Power On/Off	GND		Power Good			GND

ATX POWER On/Off : PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, please press this switch and hold down for longer than 4 seconds.

Hardware Installation

9