SOYO SY-7IZB+ Troubleshooting at First Start, Power Off, Select Save & Exit Setup, Suspend Mode

Hardware Setup SY-7IZB+

4. Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory,

and continue the boot sequence.

Troubleshooting at First Start

•What should I do if the Motherboard refuses to start?

The 66MHz setting is used as default so whenever the BIOS settings are erased or reset, the board will be able to boot up.

If the CPU frequency was set too high and the Motherboard refuses to start up, you can always load the default values by pressing the [Ins] key during boot up.

Step 19. Power Off

There are two possible ways to turn off the system:

1.Use the Shutdown command in the Start Menu of Windows 95/98 to turn off your computer.

2.Press the mechanical power-button and hold down for over 4 seconds, to shutdown the computer. If you press the power- button for less than 4 seconds, then your system will enter into

Suspend Mode.

You are now ready to configure your system with the BIOS setup program. Go to Chapter 3: BIOS SETUP

26