SOYO SY-7IZB+ manual ECP Mode use, Dma, EPP Mode Select Pwron After PWR-Fail

BIOS Setup Utility			SY-7IZB+
Onboard Parallel Ports (Continued)
Onboard Parallel	Setting	Description		Note
Ports

Parallel Port Mode

ECP/EPP

SPP

ECP

EPP/SPP

The mode depends on your Default external device that connects to this port.

If [Parallel Port Mode] is set to [ECP] mode

ECP Mode use

DMA

3	Choose DMA3	Default
1	Choose DMA1

If [Parallel Port Mode] is set to [EPP] mode

EPP Mode Select

PWRON After PWR-Fail

EPP 1.9	Select EPP port type 1.9
EPP 1.7	Select EPP port type 1.7	Default
On	The system will switch on
	when power comes back
	after a power failure.
Off	The system will remain off	Default
	when power comes back
	after a power failure.
Former-	The system will return to
sts	the state it was in before
	the power failure when
	power returns. (i.e: If the
	system was on, it will
	switch on again, if it was
	off, it will remain off)

55