SOYO SY-7IZB+ manual Handling the Motherboard, Electrostatic Discharge Precautions

Introduction SY-7IZB+

HANDLING THE MOTHERBOARD

To avoid damage to your Motherboard, follow these simple rules while unpacking:

ØBefore handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis.

ØRemove the Motherboard from its anti-static packaging. Hold the Motherboard by the edges and avoid touching its components.

ØCheck the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.

Warning: Do not apply power if the Motherboard appears damaged. If there is damage to the board, contact your

dealer immediately.

1-2 ELECTROSTATIC DISCHARGE PRECAUTIONS

Make sure to ground yourself before handling the Motherboard or other system components. Electrostatic discharge can easily damage the components. Note that you must take special precautions when handling the Motherboard in dry or air-conditioned environment.

To protect your equipment from electrostatic discharge, take the following precautions:

ØDo not remove the anti-static packaging until you are ready to install.

ØGround yourself before removing any system component from its protective anti-static packaging. (To ground yourself, grasp the expansion slot covers or other unpainted portions of the computer chassis.)

ØFrequently ground yourself while working or use a grounding strap.

ØHandle the Motherboard by its edges and avoid touching its components.

5