BIOS Setup Utility |
|
3-8 INTEGRATED PERIPHERALS
Caution: Change these settings only if you are already familiar with the Chipset.
The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer.
The following screen shows setup default settings.
| ROM PCI/ISA BIOS |
|
|
| |||
|
|
|
| ||||
| INTEGRATED PERIPHERALS |
|
|
| |||
| AWARD SOFTWARE, INC. |
|
|
| |||
IDE HDD Block Mode | : Enabled | Onboard PDC Controller | : Enabled | ||||
IDE Primary Master PIO | : Auto | Onboard Serial Port 1 | : 3F8/IRQ4 | ||||
IDE Primary Slave PIO | : Auto | Onboard Serial Port 2 | : 2F8/IRQ3 | ||||
IDE Secondary Master PIO | : Auto | URART Mode Select |
| : Normal | |||
IDE Secondary Slave PIO | : Auto | RxD , TxD Active |
| : Hi,Lo | |||
IDE Secondary Master UDMA | : Auto | IR Transmission Delay | : Enabled | ||||
IDE Secondary Slave UDMA | : Auto | Onboard Parallel Port | : 378/IRQ7 | ||||
: Enabled | Parallel Port Mode |
| : SPP | ||||
: Enabled | ECP Mode Use DMA |
| : 3 |
| |||
Onboard PCI SCSI Chip | : Enabled | EPP Mode Select |
| : EPP1.7 | |||
USB Keyboard Support | : Disabled |
|
|
|
|
|
|
Init Display First | : PCI Slot | ESC | : Quit |
| − ↓ → ← : Select Item | ||
|
|
| |||||
|
| F1 | : Help |
| PU/PD/+/- | : Modify | |
|
| F5 | : Old Values |
| (Shift) F2 | : Color | |
|
| F6 | : Load BIOS Defaults |
|
| ||
|
| F7 | : Load Setup Defaults |
|
| ||
|
|
|
|
|
|
|
|
The following tables describe each field in the INTEGRATED PERIPHERALS Menu and provide instructions on how to configure the IDE controls, FDC controls, and the onboard serial and parallel ports.
55