SOYO SY-D6IBA manual Hardware Setup, Preparations

Hardware Setup SY-D6IBA

Chapter 2

HARDWARE SETUP

Congratulations on your purchase of SY-D6IBAMotherboard. You are about to install and connect your new Motherboard.

Note: Do not unpack the Motherboard from its protective anti- static packaging until you have made the following preparations.

2-1 PREPARATIONS

Gather and prepare all the following hardware equipment to complete the installation successfully:

1.Single or Dual Pentium® II/III processor with built-in CPU

cooling fan (boxed type).

Note: This Motherboard supports non-boxed type CPUs. The heavier CPU cooling fan requires the installation of a CPU support stand included in the Motherboard package.

2.DIMM memory module

3.Computer case and chassis with adequate power supply unit

4.Monitor

5.PS/2 Keyboard

6.Pointing Device (PS/2 mouse)

7.Speaker(s) (optional)

8.Disk Drives: HDD, CD-ROM, and Floppy drive …

9.External Peripherals: Printer, Plotter, and Modem (optional)

10.Internal Peripherals: Modem and LAN cards (optional)

11.Internal SCSI Devices: Hard/Floppy/CD-ROM Drives, Tape Drives, Removable Media Drives, etc. (optional)

6