i n t e l l i g e n t w i r e l e s s | p l a t f o r m |
2.4. Device Mode Configuration
The device operational mode is displayed at the top right hand corner of each page. The device mode configuration allows the user to configure the airClient TOTAL to a NAT (Network Address Translation) mode or Router mode for
NAT: This is the default operating mode. This mode allows you to use one segment of private IP addresses for multiple hosts to access the external network using a single wireless IP address. This translation helps in protecting the access of internal hosts from external network. This mode is available in all sB3416 models.
Router: This mode allows you to configure different segment of IP address in Ethernet and Wireless interface. A standard routing functionality is available in this mode. This mode is available in all sB3416 models.
Bridge: This mode allows you to configure both WDS and
Figure 2-6 airClient TOTAL Device Mode Configuration
airClient™ TOTAL 3416 User Guide | Page 20 of 74 |
|