SmartBridges sB3210 manual Reset Options, Snmp Security Configuration

Page 34

i n t e l l i g e n t	w i r e l e s s	p l a t f o r m

	Figure 5-2 SNMP Security Configuration
	Table 5-2 SNMP Security Configuration

Page Items	Descriptions

SNMP Community	Display SNMP Community String that is currently used to communicate to
	the device through SNMP
New Community	User can change the SNMP Community String by entering a new Community
	string
Confirm Community	User must enter the same community string as New Community string to
	confirm.

Access Filters	Display the Current Access Filter status
	User can change the Access Filter status.
IP	List of 3 IP filters.
	User can enter the IP address and mask.

5.1.3. Reset Options

All reset options power cycles the device and restarts the whole system.

Reset: To reset the device. The device will come up with the current configuration/values.

Reset to Defaults: To reset the device to default configuration values.

Delayed Reset: To reset the device at a particular time and can be programmed to do so on a daily/weekly/monthly basis. The current time can be set by specifying a NTP server (there is one already specified by default) and the time zone. After enabling the delayed reset, specify a time which is valid in reference to current time. When recurrence is set to weekly, monthly or daily, the reference is made with the first set time i.e. Reset time.

airPoint™ Nexus User Configuration Guide	Page 34 of 55

Image 34

Contents AirPoint Nexus SB3210 VersionTable of Contents Overview of User Guide About This DocumentRelated Publications Technical Support Center Introduction AirPoint Nexus Configuration FeaturesSystem Requirements Checklists Pre-Installation Checklist for airPointEconomical One radio model sB3210 Parameters Units Site a Site BSignature of Engineer Name Date Post-Installation Checklist for airPoint RssiChecklist Parameters Units Site a Site B AirPoint Configuration User Login and License AgreementLicense Agreement Web GUI Administrator Password Change Description of Parameters DescriptionsUsing the Configuration Pages Navigation Menu BarEditable Boxes for Parameter Editing Description of Menus Menu Item Menu Sub-itemsWEP Only Menu Item Menu Sub-items DescriptionNone Internal ACLTools Help Ethernet Configurations AirPoint Bridge Configuration ParametersWireless Configuration AirPoint Bridge Wireless Settings Wireless Settings Items DescriptionsItems Descriptions Radio ProtocolRadio Protocol Parameters AirPoint Bridge Performance Settings Configuring Spanning Tree Protocol STP Bridge ConfigurationDefault STP Values Setting Default Value Range Purpose Setting Default Value Range Purpose T e l l i g e n t R e l e s s A t f o r m 11 Bridge Configuration Security WEP only Wireless Equivalent PrivacyWDS Table T e l l i g e n t R e l e s s A t f o r m Internal ACL with WEP disabled External ACLRadius & Internal ACL External ACL Radius & Internal ACL WPA-RadiusWPA radius Traffic Statistics Traffic StatisticsSystem Configuration ToolsSystem Configuration Descriptions Snmp SecurityReset Options Snmp Security ConfigurationNTP Time Server Setup Delayed ResetNTP Time Settings Profile ManagerSave Profile Profile Manager Menu ItemsLoad Operating Profile Profile CalendarLink Test Ping Test ResultLink Budget Planning Throughput Test Result10 Link Budget Planning Calculator Link Budget Firmware Upgrade AirPoint Nexus Firmware UpgradeSuccessful upgrade pop-up window Appendix a Configuration of the Radius Server Produce Certificates T e l l i g e n t R e l e s s A t f o r m Configure Server for TLS Install Windows XP Certificates and Setup Client for TLS Test TLS Change Windows XP for Peap Appendix B Useful terms and definitions Abbreviations AcronymsWPA Snmp Appendix C Snmp Trap Appendix D License