Silicon Image SSD-C08G(I)-3150 manual Ata Sel, Rdy/-Bsy, Ireq

Page 21

ELECTRICAL SPECIFICATION				SSD-CXXX(I)-3150 DATA SHEET
	Table 8: Signal Descriptions (Continued)

	Signal Name	Pin	Type	Description

	-ATA SEL			To enable true IDE mode, this input
	(True IDE mode)			should be grounded by the host.

	-RDY/-BSY	37	O	In memory mode, this signal is:
	(PC Card memory			• Set high when the SiliconDrive CF
	mode)			is ready to accept a new data
				transfer operation.
				• Held low when the card is busy.
				The host memory card socket must
				provide a pull-up resistor.
				At power-up and reset, the RDY/-BSY
				signal is held low (busy) until the
				SiliconDrive CF has completed its
				power-up or reset function. No access
				of any type should be made to the
				SiliconDrive CF during this time. The
				RDY/-BSY signal is held high
				(disabled from being busy) whenever
				the SiliconDrive CF has been
				powered up with +RESET
				continuously disconnected or
				asserted.

	-IREQ			I/O Operation. After the SiliconDrive
	(PC Card I/O			CF has been configured for I/O
	mode)			operation, this signal is used as
	Input Acknowledge			-Interrupt Request. This line is strobed
	Input Acknowledge			low to generate a pulse mode
				low to generate a pulse mode
				interrupt or held low for a level mode
				interrupt.

	-IREQ			In true IDE mode, this signal is the
	(True IDE mode)			active high Interrupt Request to the
				host.

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

3150C-10DSR

PAGE 11

FEBRUARY 2, 2009

Image 21

Contents Features OverviewSisecure Revision History SSD-CXXXI-3150 Data SheetTable of Contents Common Memory Description and Operation Attribute Memory Description and OperationSpace Description and Operation ATA and True IDE Register DecodingATA Command Set Nomenclature Part Numbers Sample Label List of Figures List of Tables SSD-CXXXI-3150 Data Sheet Part Numbering Nomenclature Physical Dimensions Physical SpecificationsProduct Specifications System Power RequirementsSystem Performance SiliconDrive Part# Capacity Service Life GB Written per Day ReliabilityOperational Life Span Product Capacity Specifications Environmental SpecificationsProduct Capacity Number Bytes Sectors Cylinders Heads Track Pin Assignments Electrical SpecificationSignal Name Pin Type Description Signal DescriptionsDasp SpkrInpack CselDmarq True IDE modeGND GroundIord This signal is not used in this mode PC Card memory ModeIord IowrATA SEL RDY/-BSYIreq +5V, +3.3V power PC Card memory Mode ResetREG DmackVoltage Sense Signals This signal is the same for all modes PC Card I/O ModeWait IordySymbol Parameter Minimum Maximum Units IOIS16Absolute Maximum Ratings DC Characteristics Symbol Parameter Maximum UnitsSymbol Parameter V ±10% 5V ±10% Units Minimum Maximum CapacitanceAttribute and Common Memory Read Timing Attribute and Common Memory Read TimingAttribute and Common Memory Write Timing Attribute and Common Memory Write TimingO Access Read Timing Access Read TimingO Access Write Timing Access Write TimingTrue IDE Read/Write Access Timing True IDE Read/Write Access TimingTrue IDE Multiword DMA Read/Write Access Timing True IDE Multiword DMA Read/Write Access TimingAttribute Memory Description and Operation D158 D70 ModeAttribute Memory Read Operations Function REG# CE1# CE2#Attribute Memory Write Operations Attribute Memory Map Register Operation Addr CE1#REG# WE# OE# Card Information Structure Attribute Data Description of Contents CIS Function OffsetCistplfunce Tpcemi Tpcefs Tpceio Exponent Nominal voltage = VCC nominal value A6h 1Eh IRQ Configuration table entry tuple Tuple code E4h 12h Exponent Nominal voltage = VCC nominal value F0h 4Dh Siliconsystems Proprietary Card Information Structure Configuration Option Register 200h SresetBits Description Read Changed SigChg IOis8 PwrDn Int Write Default Value Configuration and Status Register 202hPin Placement Register 204h CrdyRrdy Socket and Copy Register 206h Copy Number Socket Number Default ValueRead/Write RFUCommon Memory Read Operations Common Memory Description and OperationREG# Common Memory Write OperationsSpace Description and Operation Function Mode REG# CE1# CE2# A0 IORD# IOWR# D158 D70O Space Read Operations O Space Write OperationsATA and True IDE Register Decoding Memory-Mapped Register DecodingReg# Offset A10 A9A4 OE# = L WE# = L Independent I/O Mode Register Decoding Reg# A10 A9A4 Primary and Secondary I/O Mapped Register DecodingIORD# = L IOWR# = L Primary SecondaryTask File Register Specification CS0# CS1# DA02 DA01 DA00DIOR# = L DIOW# = L Track 0 Not Found TKONF. Set when the execute drive Error RegisterATA Registers Media Changed MC. Set toOperation Feature RegisterRead/Write ByteSector Count Register Read/Write Sector Count Default ValueLogical Block Number bits A07-A00 LBA Addressing Sector Number RegisterLogical Block Number bits A15-A08 LBA Addressing Cylinder Low RegisterLogical Block Number bits A23-A16 LBA Addressing Cylinder High RegisterDrive/Head Register HS3 HS2 HS1 HS0LBA27 LBA26 LBA25 LBA24 Status Register Drive Write Fault DWF. Always set toBSY Drdy DRQ Corr IDX ERROperation Read/Write ATA Command Code Command RegisterAlternate Status Register Operation Write Device Control RegisterSrst NIEN Bits DescriptionDevice Address Register Read/Write NWTG NHS3 NHS2 NHS1 NHS0 NDS1 NDS0 Default ValueATA Command Block and Set Description ATA Command Block and SET DescriptionATA Command Set Class Command Name Registers Used CodeATA Command Set Check Power Mode 98h, E5h Check Power Mode 98h, E5hRegister Executive Drive Diagnostic 90h Executive Drive Diagnostic 90hDrive Head Number LBA27-24 Command 50h Format Track 50hFormat Track 50h Identify Drive ECh Identify Drive EChIdentify Drive Drive Attribute Data Word Data Default Bytes Data Description Address044Ah fixed ID bit in IDEWord Data Default Bytes Data Description Address Identify Drive Drive Attribute Data Idle 97h, E3h Idle 97h, E3hIdle Immediate 95h, E1h Idle Immediate 95h, E1hInitialize Drive Parameters 91h Initialize Drive Parameters 91hDrive Command 1Xh Recalibrate 1XhRecalibrate 1Xh Read Buffer E4h Read Buffer E4hRead DMA C8h Drive Head Number LBA27-24 Command C8hRead DMA C8h LBADrive Head Number LBA27-24 Command C4h Read Multiple C4hRead Multiple C4h Drive Head Number LBA27-24 Command 20h or 21h Read Sector 20h, 21hRead Sector 20h, 21h Drive Head Number LBA27-24 Command 22h or 23h Read Long Sectors 22h, 23hRead Long Sectors 22h, 23h Drive Head Number LBA27-24 Command 40h or 41h Read Verify Sectors 40h, 41hRead Verify Sectors 40h, 41h Drive Head Number LBA27-24 Command 7Xh Seek 7XhSeek 7Xh Set Features EFh Set Features EFhSet Features’ Attributes Feature OperationSet Multiple Mode C6h Set Multiple Mode C6hSet Sleep Mode 99h, E6h Set Sleep Mode 99h, E6hStandby 96h, E2h Standby 96h, E2hStandby Immediate 94h, E0h Standby Immediate 94h, E0hWrite Buffer E8h Write Buffer E8hDrive Head NumberLBA27-24 Command CAh Write DMA CAhWrite DMA CAh Drive Head NumberLBA27-24 Command C5h Write Multiple C5hWrite Multiple C5h Drive Head Number LBA27-24 Command 30h or 31h Write Sectors 30h, 31hWrite Sectors 30h, 31h Drive Head Number LBA27-24 Command 32h or 33h Write Long Sectors 32h, 33hWrite Long Sectors 32h, 33h Drive Head Number LBA27-24 Command C0h Erase Sectors C0hErase Sectors C0h Extended Error Codes Description Extended Error CodesRequest Sense 03h Request Sense 03hDrive Head Number LBA27-24 Command 87h Translate Sector 87hTranslate Sector 87h Wear-Level F5h Wear-Level F5hDrive Head Number LBA27-24 Command CDh Write Multiple w/o Erase CDhWrite Multiple w/o Erase CDh Drive Head Number LBA27-24 Command 38h Write Sectors w/o Erase 38hWrite Sectors w/o Erase 38h Drive Head Number LBA27-24 Command 3Ch Write Verify 3ChWrite Verify 3Ch Part Numbering Sales and SupportPart Numbering Nomenclature SSD YYYPart Number Capacity Part NumbersRelated Documentation Related Documentation