Silicon Image SSD-C08G(I)-3150 Drive/Head Register, HS3 HS2 HS1 HS0, LBA27 LBA26 LBA25 LBA24

Page 62

ATA REGISTERS

SSD-CXXX(I)-3150 DATA SHEET

DRIVE/HEAD REGISTER

The Drive/Head register is used by the host and the device to select the type of addressing (CHS or LBA), the drive letter, and either bits 3-0 of the head number in CHS mode or logical block number bits 27-24 in LBA mode.

Table 40: Drive/Head Register

Operation

D7

D6

D5

D4

D3

D2

D1

D0

Read/Write

1

LBA

1

DRV

HS3

HS2

HS1

HS0

 

 

 

 

 

LBA27 LBA26 LBA25 LBA24

Default

1

0

1

0

0

0

0

0

Value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Drive/Head register is used by the host to specify one of a pair of ATA drives present in the platform.

Bit(s)

Description

 

 

6

LBA. Selects between CHS (0) and LBA (1) addressing mode.

4Drive Address (DRV). Indicates the drive number selected by the host, either 0 or 1.

3-0 HS3 to 0. Indicates bits 3-0 of the head number in CHS addressing mode or LBA bits 27-24 in LBA mode.

CHS to LBA conversion: LBA = (C x HpC + H) x SpH + S -1

LBA to CHS conversion:

C = LBA/(HpC x SpH)

H = (LBA/SpH) mod (HpC)

S = (LBA mod(SpH)) + 1

...where:

C is the cylinder number H is the head number S is the sector count

HpC is the head count per cylinder count SpH is the sector count per head count (track)

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

3150C-10DSR

PAGE 52

FEBRUARY 2, 2009

Image 62
Contents Sisecure FeaturesOverview SSD-CXXXI-3150 Data Sheet Revision HistoryTable of Contents Space Description and Operation Attribute Memory Description and OperationCommon Memory Description and Operation ATA and True IDE Register DecodingATA Command Set Nomenclature Part Numbers Sample Label List of Figures List of Tables SSD-CXXXI-3150 Data Sheet Part Numbering Nomenclature Physical Specifications Physical DimensionsSystem Performance Product SpecificationsSystem Power Requirements Operational Life Span SiliconDrive Part# Capacity Service Life GB Written per DayReliability Product Capacity Number Bytes Sectors Cylinders Heads Track Product Capacity SpecificationsEnvironmental Specifications Electrical Specification Pin AssignmentsSignal Descriptions Signal Name Pin Type DescriptionSpkr DaspCsel InpackGND True IDE modeDmarq GroundIord This signal is not used in this mode PC Card memory ModeIord IowrIreq ATA SELRDY/-BSY REG Reset+5V, +3.3V power PC Card memory Mode DmackWait This signal is the same for all modes PC Card I/O ModeVoltage Sense Signals IordyAbsolute Maximum Ratings Symbol Parameter Minimum Maximum UnitsIOIS16 Symbol Parameter V ±10% 5V ±10% Units Minimum Maximum Symbol Parameter Maximum UnitsDC Characteristics CapacitanceAttribute and Common Memory Read Timing Attribute and Common Memory Read TimingAttribute and Common Memory Write Timing Attribute and Common Memory Write TimingAccess Read Timing O Access Read TimingAccess Write Timing O Access Write TimingTrue IDE Read/Write Access Timing True IDE Read/Write Access TimingTrue IDE Multiword DMA Read/Write Access Timing True IDE Multiword DMA Read/Write Access TimingAttribute Memory Read Operations D158 D70 ModeAttribute Memory Description and Operation Function REG# CE1# CE2#Attribute Memory Write Operations REG# WE# OE# Attribute Memory MapRegister Operation Addr CE1# Attribute Data Description of Contents CIS Function Offset Card Information StructureCistplfunce Tpcemi Tpcefs Tpceio Exponent Nominal voltage = VCC nominal value A6h 1Eh IRQ Configuration table entry tuple Tuple code E4h 12h Exponent Nominal voltage = VCC nominal value F0h 4Dh Siliconsystems Proprietary Card Information Structure Bits Description Configuration Option Register 200hSreset Configuration and Status Register 202h Read Changed SigChg IOis8 PwrDn Int Write Default ValueRrdy Pin Placement Register 204hCrdy Read/Write Copy Number Socket Number Default ValueSocket and Copy Register 206h RFUREG# Common Memory Description and OperationCommon Memory Read Operations Common Memory Write OperationsO Space Read Operations Function Mode REG# CE1# CE2# A0 IORD# IOWR# D158 D70Space Description and Operation O Space Write OperationsReg# Offset A10 A9A4 OE# = L WE# = L ATA and True IDE Register DecodingMemory-Mapped Register Decoding Independent I/O Mode Register Decoding IORD# = L IOWR# = L Primary and Secondary I/O Mapped Register DecodingReg# A10 A9A4 Primary SecondaryDIOR# = L DIOW# = L Task File Register SpecificationCS0# CS1# DA02 DA01 DA00 ATA Registers Error RegisterTrack 0 Not Found TKONF. Set when the execute drive Media Changed MC. Set toRead/Write Feature RegisterOperation ByteRead/Write Sector Count Default Value Sector Count RegisterSector Number Register Logical Block Number bits A07-A00 LBA AddressingCylinder Low Register Logical Block Number bits A15-A08 LBA AddressingCylinder High Register Logical Block Number bits A23-A16 LBA AddressingLBA27 LBA26 LBA25 LBA24 Drive/Head RegisterHS3 HS2 HS1 HS0 BSY Drdy Drive Write Fault DWF. Always set toStatus Register DRQ Corr IDX ERRCommand Register Operation Read/Write ATA Command CodeAlternate Status Register Srst Device Control RegisterOperation Write NIEN Bits DescriptionRead/Write NWTG NHS3 NHS2 NHS1 NHS0 NDS1 NDS0 Default Value Device Address RegisterATA Command Set ATA Command Block and SET DescriptionATA Command Block and Set Description Class Command Name Registers Used CodeATA Command Set Register Check Power Mode 98h, E5hCheck Power Mode 98h, E5h Executive Drive Diagnostic 90h Executive Drive Diagnostic 90hFormat Track 50h Drive Head Number LBA27-24 Command 50hFormat Track 50h Identify Drive ECh Identify Drive ECh044Ah fixed Word Data Default Bytes Data Description AddressIdentify Drive Drive Attribute Data ID bit in IDEWord Data Default Bytes Data Description Address Identify Drive Drive Attribute Data Idle 97h, E3h Idle 97h, E3hIdle Immediate 95h, E1h Idle Immediate 95h, E1hInitialize Drive Parameters 91h Initialize Drive Parameters 91hRecalibrate 1Xh Drive Command 1XhRecalibrate 1Xh Read Buffer E4h Read Buffer E4hRead DMA C8h Drive Head Number LBA27-24 Command C8hRead DMA C8h LBARead Multiple C4h Drive Head Number LBA27-24 Command C4hRead Multiple C4h Read Sector 20h, 21h Drive Head Number LBA27-24 Command 20h or 21hRead Sector 20h, 21h Read Long Sectors 22h, 23h Drive Head Number LBA27-24 Command 22h or 23hRead Long Sectors 22h, 23h Read Verify Sectors 40h, 41h Drive Head Number LBA27-24 Command 40h or 41hRead Verify Sectors 40h, 41h Seek 7Xh Drive Head Number LBA27-24 Command 7XhSeek 7Xh Set Features’ Attributes Set Features EFhSet Features EFh Feature OperationSet Multiple Mode C6h Set Multiple Mode C6hSet Sleep Mode 99h, E6h Set Sleep Mode 99h, E6hStandby 96h, E2h Standby 96h, E2hStandby Immediate 94h, E0h Standby Immediate 94h, E0hWrite Buffer E8h Write Buffer E8hWrite DMA CAh Drive Head NumberLBA27-24 Command CAhWrite DMA CAh Write Multiple C5h Drive Head NumberLBA27-24 Command C5hWrite Multiple C5h Write Sectors 30h, 31h Drive Head Number LBA27-24 Command 30h or 31hWrite Sectors 30h, 31h Write Long Sectors 32h, 33h Drive Head Number LBA27-24 Command 32h or 33hWrite Long Sectors 32h, 33h Erase Sectors C0h Drive Head Number LBA27-24 Command C0hErase Sectors C0h Request Sense 03h Extended Error CodesExtended Error Codes Description Request Sense 03hTranslate Sector 87h Drive Head Number LBA27-24 Command 87hTranslate Sector 87h Wear-Level F5h Wear-Level F5hWrite Multiple w/o Erase CDh Drive Head Number LBA27-24 Command CDhWrite Multiple w/o Erase CDh Write Sectors w/o Erase 38h Drive Head Number LBA27-24 Command 38hWrite Sectors w/o Erase 38h Write Verify 3Ch Drive Head Number LBA27-24 Command 3ChWrite Verify 3Ch Part Numbering Nomenclature Sales and SupportPart Numbering SSD YYYPart Numbers Part Number CapacityRelated Documentation Related Documentation