Windows ME Driver Installation

1.At the Add New Hardware Wizard, choose Specify the location of the driver (Advanced), then click

Next.

2.Check Specify a location, uncheck the other box, insert the driver CD, type in D:\Me, then click Next. (Change D: to match your CD-ROM drive letter)

3.Click Next and Finish.

4.Repeat steps 1-3.

5.Restart Windows to complete the installation.

To Verify Successful Installation In Windows 95/98/ 98SE/ME:

1.From the main desktop, right click My Computer, click Properties, then click Device Manager.

2.Double click Ports (COM & LPT), CyberSerial PCI 16Cxxx..., Printer Port..., and CyberParallel PCI should be displayed.

3.Double click Multi-function adapters, SIIG CyberPro 1S1P PCI board should be displayed.

Windows NT 4.0 Driver Installation

1.From the desktop click Start, then Run.

2.Insert the driver CD, type in D:\NT4\Install_Serial.exe,thenclickOK. (Change D: to match your CD-ROM drive letter)

3.Click Next when the Welcome window appears.

4.Choose Install, then click Next.

5.Click Yes, then click Exit.

6.From the desktop click Start, then Run.