SIIG 1S1P PCI manual Windows 2000 Driver Installation, Windows XP Driver Installation

7.TypeinD:\NT4\Install_Parallel.exe,thenclickOK. (Change D: to match your CD-ROM drive letter)

8.Repeat steps 3-5.

9.Click Yes to restart Windows to complete the installation.

To Verify Successful Installation In Windows NT 4.0:

1.Go to Start / Settings / Control Panel, double click Ports device icon.

2.A new COMport will be assigned when successfully installed.

3.Click Start, Programs, Administrative Tools, Windows NT Diagnostics. Click Resources tab, SIIGpar and SIIGser should be displayed.

Windows 2000 Driver Installation

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device (recommended), and click Next.

3.Select Specify a location, uncheck the other boxes, and click Next.

4.Insert the driver CD, type in D:\2000, then click OK. (Change D: to match your CD-ROM drive letter)

5.Click Next and Finish.

6.Repeat steps 1-5two more times.

7.Restart Windows to complete the installation.

Windows XP Driver Installation

1.At the FoundNewHardwareWizard, chooseInstall from a list or specific location (Advanced), then click Next.

6