Changing COM Port Address
Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting.
Windows95/98/98SE/ME
1.From the Device Manager window double click Ports (COM & LPT), then double click CyberSerial PCI... serial port.
2.Click Settings tab, at the Port Name box click the down arrow and select a COM address that is not currently in use.
3.Click OK, click OK again to close Device Manager to save the changes.
Windows2000/XP/Server2003
1.From the Device Manager window double click Ports (COM & LPT), then double click CyberSerial PCI... serial port.
2.Click Settings tab and click Advanced....
3.At the COM Port number box, click the down arrow and select a COM port that is not in use. Click OK.
4.Click OK, then close Device Manager to save the changes.
8