Software Installation

This section provides information on how to install the Cyber 1S1P PCI drivers.

Windows 95 Driver Installation

1.At the Update Device Driver Wizard window, click Next.

2.Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to match your CD-ROM drive letter)

3.From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in D:\9x, then click OK.

4.Repeat steps 1-3.

5.Restart Windows to complete the installation.

Windows 98/98SE Driver Installation

1.At the Add New Hardware Wizard window, click Next.

2.Select Search for the best driver for your device (Recommended), then click Next.

3.Select Specify a location, uncheck the other boxes, insert the driver CD, type in D:\9x, then click Next. (Change D: to match your CD-ROM drive letter)

4.Click Next, then Finish.

5.Repeat steps 1-4.

6.Restart Windows to complete the installation.