Panasonic CF-M34, CF-17 Installing USB Devices, Set the power management function to disable

USB Devices

3 0

CAUTION

After a driver has been installed, do not use the suspend or hibernation func- tion. If the suspend or hibernation mode is activated, the computer may not function properly. Power off, then on, using the power switch to resume proper operation.

If you want to use the suspend or hibernation function when the USB driver is installed, disable the USB device function of the computer.

Installing USB Devices

1 Set the power management function to disable

1Run the Setup Utility. ( page 37)

2Using and , select [Power].

3		Using	and	, select [Power Switch] and press		Enter .
4		Using	and	, select [Power Off] and press	Enter .
	5	Using	and	, select [Panel Switch] and press		Enter .
	6	Using	and	, select [LCD Off] and press	Enter .
	7	Using	and	, select [Fn+F7/Fn+F10] and press		Enter .
USB Port
8		Using	and	, select [Disable] and press Enter .
9		Press	F10 , then select [Yes].

2 Install the Windows 95 USB device drivers

1In [Start] - [Run], input [c:\util\msupdate\usb\usbsupp.exe], then press [OK]. At the confirmation message, press [Yes].

2Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].

•Installation will start if [Yes] is pressed.

•Installation will be aborted if [No] is pressed.

3At the display indicating the completion of installation, press [OK]. The com- puter will automatically restart.

4In [Start] - [Run], input [c:\util\msupdate\usb\usbcopy.bat], then press [OK].

5Click at the upper right corner to close the display.

6In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select [PCI Universal Serial Bus] in [Other devices], press [Remove], then press [OK].

7Press [Refresh] and press [Close] at the [System Properties],

8Restart the computer.

(To next page)