Panasonic CF-M34 Dealing With Problems Advanced, Starting Up, Shutting Down, Battery Indicator

Dealing With Problems (Advanced)

5 0

When a problem occurs, please refer to this page. If you still cannot troubleshoot the problem, please contact Panasonic Technical Support.

Starting Up

The power indicator or	Check the cable connection for the AC adapter.
battery indicator is not lit	Check to see if a fully charged battery is properly installed.
	Remove the battery pack and disconnect the AC adapter, then connect them again.
is displayed	Please input your password. If you have forgotten it, contact Panasonic Technical
	Support.
[POST Startup Error(s)]	page 48
is displayed
Windows startup, or an	Press	F9	in the Setup Utility (	page 37). This will restore the Setup Utility's
o p e r a t i o n i s e x t r e m e l y	settings to their default values (except the password settings). Then, the Setup Utility
s l o w	must be run once again for you to input the appropriate operating environment settings.
	(The processing speed depends on the application software used, so this operation
	may not cause the processing speed to increase.)
The date and time are	You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control
incorrect	Panel].
	When the computer is connected to a Local Area Network (LAN), please confirm
	the date and time of the server.
	If you continue to experience problems, the internal battery maintaining the clock
	may need to be replaced. Please contact Panasonic Technical Support.
When the previous item	Press	F9	in the Setup Utility (	page 37). This will restore the Setup Utility's
is not the cause	settings to their default values (except the password settings).
	In the MS-DOS mode, run SCANDISK to check the hard disk.
	At start-up, press F8 to operate the computer in the Safe mode.
	Try removing all peripheral devices.

Shutting Down

U n a b l e t o s h u t d o w n Windows 95

If a USB device is connected, try removing it.

Battery Indicator

The red indicator lights.	The battery level is low. Save your data and power off your computer.
Repeated beeping sound	After connecting the AC adapter or replacing the battery pack with a fully charged
while the computer is in	one, turn your computer on.
u s e .
The red indicator blinks	The battery pack or recharging function may be defective.	Quickly remove the
	battery pack and disconnect the AC adapter, then connect them again.
	If the problem persists, contact Panasonic Technical Support.
After the AC adapter is	Unable to charge because of an improper temperature range. (	"Precau-
connected, the orange in-
	tions")
dicator blinks five times