Panasonic CF-17, CF-M34 manual External Display, Connect the external display to your computer

External Display

2 9

1

2

Power off your computer ( "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode.

Connect the external display to your computer

N O T E

For more detailed information, please refer to the operation manual of the external display.

3 Turn on the external display, then turn on your computer

External Display Port You can select either an external display, LCD or simultaneous with Fn

+F3 .

In addition, you can set the display to use during start-up with the follow- ing procedure.

1Run the Setup Utility. ( page 37)

2Using and , select [Main].

3	Using	and	, select [Display] and press Enter .
4	Using	and	, select the display to use and press Enter .
5	Press	F10 , then select [Yes].

6Select your external display.

Set your external display for [Monitor] in [Start] - [Settings] - [Con- trol Panel] - [Display] - [Settings] - [Advanced Properties].

When a monitor that does not conform to the Plug & Play stan- dards is connected, select [Change] and make the monitor set- tings.