Dealing With Problems (Advanced)
5 5
Connecting Peripherals
Your peripheral does not | You need to use drivers conforming to Windows 95 Version 4.00.950B | ||||
work (An error occurs while | Some earlier drivers will no longer work. |
| |||
installing the | driver) |
| For more information, please ask the manufacturer of the driver in question. | ||
|
|
|
| ||
Unable to print |
| Check the |
| ||
|
|
|
| Make sure the printer is on. |
|
|
|
|
| Make sure the printer is in the online state. |
|
|
|
|
| Make sure paper is in the printer tray and there is no paper jam. | |
|
|
|
| Confirm that [Parallel Port] has not been set to [Disable]. | |
|
|
|
| ||
T h e c u r s o r | d o e s | n o t | Check your mouse connection, then reboot the computer from the keyboard. | ||
move from mouse opera- | From the keyboard, you may choose to press down on | , then select [Shut | |||
tions |
|
|
| Down]. |
|
The device connected to | Check the connection. |
| |||
the serial port does not | Confirm that the device driver for the serial port works. | Please refer to the refer- | |||
w o r k |
|
|
| ence manual of the device. |
|
|
|
|
| Confirm that two mouse devices are not connected, one through the external | |
|
|
|
| keyboard/mouse port and the other through the serial port. | |
|
|
|
| Try setting [Touch Pad] to disable in the Setup Utility. |
|
|
|
|
| Confirm that [Serial Port A] has not been set to [Disable]. | |
|
|
|
|
| |
E x t e r n a l | m o u s e | o r | Try setting [Touch Pad] to disable in the Setup Utility. |
| |
t r a c k b a l l c o n n e c t e d t o | In some circumstances, if a PS/2 external mouse with a serial interface conver- | ||||
t h e e x t e r n a l | k e y b o a r d / | sion function is connected to the port, it may not operate normally. Try connecting | |||
m o u s e p o r t | d o e s | n o t | it to the serial port. |
| |
w o r k |
|
|
|
|
|
|
|
| |||
A PC Card does not work | Make sure the card is properly inserted. |
| |||
|
|
|
| Confirm that the card conforms to the PC Card Standard. | |
|
|
|
| Note that after a driver is installed, the computer must be rebooted. | |
|
|
|
| Check that the proper port settings have been made. |
|
|
|
|
| Read the PC Card’s manual. Or, you may need to call the manufacturer of the PC | |
|
|
|
| Card. |
|
|
|
|
| ||
You do not know the |
| page 28 |
| ||
available RAM module |
|
| |||
|
| ||||
The RAM module has not | Make sure the RAM module has been properly inserted. | ||||
been recognized |
| Use the RAM module that support the recommended specifications. | |||
|
|
| |||
The address map for |
| Check the address map by going to [View Resources] in [Start] - [Settings] - [Control | |||
IRQ, I/O port address, | Panel] - [System] - [Device Manager] - [Computer] - [Properties]. | ||||
etc. is unclear |
|
|
|
| |
|
|
| |||
A USB device does not | Make sure a driver is installed. |
| |||
w o r k |
|
|
| Contact the manufacturer of the product. |
|
|
|
|
|
|
|
